Replaces

2002-2003 Ford Explorer 4 Door Front & Rear Shock & Spring Assembly (Set of 4)

Part Details

  • Front / Rear Location: Front
  • Front / Rear Location: Rear
  • Quantity: Set of 4

  • New

These replacement shock assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a SET of 4
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Each Shock and Spring Assemblies includes:
    • Upper Mounts
    • Upper Spring Isolators
    • Upper Spring Seats
    • Lower Spring Isolators
    • Shocks
  • Direct replacements
  • Built to strict quality control standards

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:48)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Strut (1:18)
    • Apply rust penetrant to the three 13mm nuts on the top of the strut
    • Remove the 8mm bolt from the nearby valve to access the strut nuts
    • Remove the three 13mm nuts from the top of the strut
    • Remove the 24mm bolt from the bottom of the strut
    • Pry the strut down with a pry bar
    • Pull the strut forward up and out
  3. Installing the New Strut (3:02)
    • Feed the strut into the lower control arm
    • Push the strut studs into place
    • Fasten the three 13mm nuts onto the top of the strut
    • Remove the nut for the bottom strut bolt
    • Tap the 24mm bolt into the bottom of the strut with a hammer
    • Thread the nut onto the 24mm bolt
    • Support the strut with a jack
    • Tighten the 24mm bolt to 130 foot-pounds of torque
  4. Reattaching the Wheel (4:47)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  5. Fastening the Strut (5:15)
    • Torque the three 13mm nuts to 30 foot-pounds
    • Put the valve into place
    • Insert the 8mm bolt into the valve

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 8mm Socket
  • 19mm Socket
  • 24mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:08 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 8mm Socket
  • 19mm Socket
  • 24mm Socket




Vehicle Fit

  • 2002-2003 Ford Explorer 4 Door Front & Rear Shock & Spring Assembly (Set of 4)
  • 2002-2003 Mercury Mountaineer Front & Rear Shock & Spring Assembly (Set of 4)
$297.45
Part #: 1ASSP00277

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est