U.S. Toll-Free Call Center   Hours
888-844-3393
Espanol: 866-401-3393


Highest Ratings

Quality: We've got the awards to prove it!

We've won the Bizrate Circle of Excellence award,
7 years in a row. Rated outstanding for quality, satisfaction, service, and on time delivery. 1A Auto selects the highest quality parts from the best manufacturers. Check our excellent ratings.
Fastest Shipping
No-Hassle Returns
USA Support Techs
Best Value
Our Guarantee

Customer Feedback


I found the replacement tailli...
Chevrolet C1500 SS454
Marshall, Midlothian, TX



Click here to try out our new site!
Home > Chevy > Throttle Position Sensor

Chevy Throttle Position Sensor

Bizrate Circle of Excellence Platinum - See 1A Auto Reviews at Bizrate.com
Choose Your Chevy Model


Throttle Position Sensor

Chevy Throttle Position Sensor

What is a Throttle Position Sensor and where is it Located?

An important part of the engine management system of your vehicle is the throttle position sensor, commonly abbreviated and referred to as a TPS sensor or switch. This sensor is usually mounted onto the side of the throttle body and is used to monitor the position of the plate inside the throttle body, i.e. how open or closed it is. The throttle body is one component of the fuel injection system; it is essentially a valve used to control the amount of air entering into the engine. The driver controls the position of this plate through the accelerator or gas pedal, either directly by cable, or electronically which is known as “drive by wire”. The more you press down on the accelerator pedal, the more this throttle plate opens, allowing for more air to enter the engine and thus the vehicle to go faster. Conversely, when you slow down, your throttle plate closes and the amount of air flowing into your engine is decreased.

The engine control unit / module (ECM, ECU, or PCM) uses the information that is sent to it from the throttle position sensor, along with input from other sensors, to calculate engine load and control many things such as fuel and ignition timing, as well as automatic transmission shift points. A properly functioning throttle position sensor (TPS) is crucial for the ECU to maintain good fuel efficiency and engine performance.

Throttle Position Sensor Types & Failure

There are two major types of throttle position sensors used on vehicles today: contact type and non-contact type. Contact type (potentiometer) throttle position sensors are connected mechanically to the throttle body, and this type was once the industry standard. Many modern vehicles now use non-contact sensors, such as a Hall effect sensor. Although contact style throttle body sensors are more prone to failure, all throttle position sensors can fail over time. They are frequently exposed to high temperatures and vibration, and oftentimes the circuit board can crack and soldered connections can fail.

Faulty throttle body position sensors can lead to stalling, rough idle, poor performance and fuel economy. Over time, contact style sensors may develop “dead spots”; this usually results in a hesitation under acceleration. You can check for dead spots by monitoring voltage output, watching for jumps or dips with either a scan tool or multi-meter. A multi-meter is also useful for checking the power supply and ground circuit which will aid in locating the cause of the problem. Most TPS issues will be accompanied by a CEL, or check engine light and error code. Common OBDII Check Engine Codes related to throttle position sensors (TPS) include:

P0120 Throttle Position Sensor/Switch A Circuit Malfunction
P0121 Throttle Position Sensor/Switch A Circuit Range/Performance Problem
P0122 Throttle Position Sensor/Switch A Circuit Low Input
P0123 Throttle Position Sensor/Switch A Circuit High Input
P0124 Throttle Position Sensor/Switch A Circuit Intermittent

Because the throttle position sensor is such a critical component of your car or truck, making sure that it is working properly is especially important. If your current TPS has failed, then a replacement should be obtained and installed as soon as possible.

Replacing your Throttle Position Sensor

Replacing a faulty TPS can be easier than you think; it can be done on most applications with basic hand tools. Some applications may require fine adjustment of the new throttle position switch (TPS). A good repair manual will take you step by step through the process.

Need a Throttle Position Sensor Replacement?

If the throttle position switch (TPS) on your vehicle goes bad it could cause a poor / erratic running engine with little or no power. If you are in need of a throttle position sensor replacement, then you have come to the right place! At 1A Auto, we have replacement throttle position sensors for many makes and models, all at great prices. Our sensors are high quality aftermarket units and are designed to directly replace the unit for the application for which they are listed – no guesswork on your part!

We also make shopping for a replacement throttle position sensor for your car, truck, SUV or van easy at 1A Auto - we're here to help you select the right part for your vehicle! Call our customer service toll free at 888-844-3393 if you have any questions about our throttle body sensors, warranty, compatibility or to purchase, or you can buy online.


Welcome to 1A Auto....
For more than 50 years, the Green family has been installing and using the same high quality auto parts that you'll find on our website. We actually use the parts we sell, and we've been selling online since 1999. Our company's mission is to make your car projects go smoothly, and to become your trusted source for auto parts. To this end, we treat our customers like family.

We employ USA based, knowledgeable support technicians. They'll help you through your project. We always make sure you get the right part. And we boast the industry's most generous returns policy. You won't find a company more passionate about auto parts than 1A Auto.
See 1A Auto on Facebook Watch our auto parts installation videos on Youtube Nutts and Bolts Blog Google Plus
Free Shipping