Replaces

1999-2004 Jeep Grand Cherokee Wheel Bearing & Hub Assembly Front ( Timken)

This part replaces:

  • TIMKEN HA598679

  • New

TIMKEN WHEEL BEARING & HUB ASSEMBLY: HA598679

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assembly
  • Fits either the LH (Driver Side) or RH (Passenger Side) FRONT
  • 3 bolt flange
  • Direct replacement
  • Replaces dealer part numbers: 52098679AB, 52098679AD
  • Fits 5 Lug Wheel
  • Studs already installed
  • Built to strict quality control standards

Note: This part is an authentic Timken brand product that is supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Install the new hub (0:30 in the video)
    • Use a wire brush to clean up the steering knuckle
    • Install the hub and hand thread on the bolts.
    • Torque the bolts to 65 ft lbs, rotating between the bolts, tightening a little bit around and around so the hub goes in evenly.
    • Put the hub nut and washer in, tighten but do not torque all the way just yet.
  2. Assemble the brake (3:20 in the video)
    • Put the rotor back on on, putting a lug nut on just to keep it from jumping around on you while you put the caliper back together.
    • Bolt the caliper bracket back on.
    • Install the brake pads, using a little anti-seize grease on the mounting edges.
    • Compress the caliper with a C-clamp and install it onto the bracket and bolt it in.
    • Torque the hub nut to 175.
    • Have someone in the car put the car in four wheel drive and in gear and hold down the brakes while you do this.
    • Install the hub washer, retainer and cotter pin.
  3. Put your wheel back on. (7:20 in the video)
    • Put the wheel on and use a star pattern to hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.
    • Pump the brakes a few times to re-compress the caliper pistons.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Slip-Joint Pliers

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - SAE

  • 11/16 Inch Socket
  • 3/4 Inch Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush

How-to Video:

(08:17 min)

Tools List:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Slip-Joint Pliers

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - SAE

  • 11/16 Inch Socket
  • 3/4 Inch Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush



This part replaces:

  • TIMKEN HA598679

Vehicle Fit

  • 1999-2004 Jeep Grand Cherokee Wheel Bearing & Hub Assembly Front ( Timken)
$114.95
Part #: TKSHF00027

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
TIMKEN
Brand #: HA598679

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est