1993-1997 Ford Ranger Headlight and Corner Light Kit1ALHT00064
- Set of 4 lamps includes:
- LH (Driver Side) & RH (Passenger Side) Headlights
- LH (Driver Side) & RH (Passenger Side) Park Lights
- Include lenses, housings, and adjusting screws
- Lights are complete and ready to install
- Bulbs not included
- These headlamps will install just as your original do. You can use your existing hardware and wiring harnesses.
- Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
- If this headlight should fail to provide satisfactory performance you may exchange it.
- 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
- Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
- Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
To replace just the headlight bulbs
- Pop the hood and secure it.
- Reach behind the head light assembly and remove the bulb.
- Reverse the process to install.
Remove the grille
- Remove the six Phillips screws
- Pull the grille off.
Remove the parking light assembly
- Remove the 11 mm nut to pull out the parking light assembly.
- Unclip the parking light assembly
- Unplug the wiring harness and bulb
Remove the headlight assembly
- Pull up the tabs anchoring the head light assembly
- Pull out the head light assembly
- Disconnect the wiring harness.
Aim the headlights
- Adjust the adjustor screws to match the old headlight using a Phillip's screwdriver
Install the new headlight assembly
- Plug in bulbs and harness
- Clip into place
- Bolt in using your 11mm socket and ratchet
Install the grille
- Put it into place
- Secure with the six Phillips screws and Phillips screwdriver
How-to Video:(12:04 min)
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 11mm Socket
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
- 1993-1997 Ford Ranger Headlight and Corner Light Kit
Part #: 1ALHT00064
- Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."- Dwuan M.