Replaces

1992-1996 Toyota Camry 4 Door Exterior Door Handle Pair Rear

Part Details

  • Quantity: Pair

This part replaces:

  • DORMAN 77386,77401

  • New

This replacement Toyota Camry rear door handle pair is just what you need to get your Toyota in good looking form again!

Specifications

  • Comes as a Pair for the rear doors
  • Injected molded plastic
  • Black Finish
  • Direct replacements for original handles
  • Fits 4 door vehicles
  • Does not fit front doors

These parts are a direct bolt on and built to strict quality control standards. They are a great replacement and have substantial cost savings over dealer units.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the door panel (0:55 in the video)
    • Pry up the door latch bezel with a flat blade screwdriver.
    • Do the same to the switch panel.
    • Unplug the switch panel from the wiring harness.
    • Use a Phillips screwdriver to remove the screws in the door pull.
    • On the edges of the door panel, remove the push clips by depressing the center and pulling the body of the clip out.
    • Pull the door panel off, lifting it up over the lock and door latch.
  2. Remove the door handle (3:05 in the video)
    • Carefully pull back the water shielding.
    • Disconnect the door handle by prying the rods off the pin connecting them to the inner door latch.
    • Use a screwdriver to remove the lock mechanism.
    • Pry out the child lock knob with a flat blade screwdriver.
    • Remove the two 10 mm bolts securing the door handle.
    • Pull the door handle out.
  3. Install the new door handle (5:30 in the video)
    • Clip the door handle into the door.
    • Reconnect the latch and lock rods.
    • Bolt the door handle into the door with your 10 mm socket and driver.
    • Secure the locking mechanism with the Phillips screws and driver.
    • Snap the child lock knob back in.
    • Reconnect the latch and lock rods to the pin connecting them to the inner door latch.
    • Replace the water shield, making sure you have a good seal.
  4. Put the door panel back together. (9:00 in the video)
    • Thread your wiring harness through the switch panel hole.
    • Clip the door panel on, securing with the push clips.
    • Depress the body of the clip and push in the center to anchor them.
    • Screw in the two Phillips screws in the door pull.
    • Reconnect the wiring harness to the switch panel.
    • Clip the switch panel and the door latch bezel back on.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

How-to Video:

(09:42 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • DORMAN 77386,77401

Vehicle Fit

  • 1992-1996 Toyota Camry 4 Door Exterior Door Handle Pair Rear
$35.25
Save 56%
List: $79.75 Save: $44.50
Part #: 1ADHS00026

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est