1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Tailgate Lock Cylinder 97-04 Ford F-150

Share on:
  1. step : Opening the Stuck Tailgate (0:46)
    • Remove the eight T30 screws from the tailgate cover
    • Remove the two T30 Torx bolts from the metal backing
    • Remove the metal backing
    • Check the leg that actuates the arm
    • Check the actuator
    • Check the latch rods
  2. step : Removing the Tailgate Handle (1:46)
    • Pry the latch rod tabs with a flat blade screwdriver
    • Release the latch rods
    • Remove the 10mm nuts from the tailgate handle
    • Remove the tailgate handle
  3. step : Removing the Lock Cylinder (2:21)
    • Pry out the snap ring with a flat blade screwdriver
    • Wiggle the lock cylinder out of the handle
  4. step : Installing the Lock Cylinder (2:33)
    • Insert the lock into the opening
    • Clip in the snap ring
  5. step : Installing the Tailgate Handle (3:01)
    • Insert the tailgate handle into place
    • Tighten the two 10mm nuts to the mechanism
    • Pull the slack out of the rods without moving the latch
    • Lock the rods into their tabs
    • Test the tailgate latch
    • If the tailgate won't close, give the rods more slack
  6. step : Reinstalling the Metal Backing (4:28)
    • Tighten the two T30 Torx bolts to the metal backing
    • Tighten the eight T30 Torx bolts to the tailgate cover

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at, your trusted source for quality auto parts.

In this video, we're going to be working with our 1998 Ford F-150. We're going to show you how to remove and replace your vehicle's tailgate lock cylinder.

If you like this video, please click subscribe. We have a ton more information on this and many other vehicles. And if you ever need parts for your truck, you can follow the link down in the description over to

Here are the items you'll need for this repair: 10mm socket, ratchet, T30 Torx socket, flat blade screwdriver

You have eight pieces of hardware securing the cover and the backplate onto the tailgate. Ours have clearly been replaced a few times and are various styles and sizes of hardware. Use the appropriate tool and ratchet to remove whatever hardware is securing your plastic back cover. If you don't have this plastic cover the hardware should be the same and in the same locations to remove the steel backing. Remove the plastic backing if you have it. Once you remove your plastic cover, if you have one, you'll have two T-30 Torx bolts you need to remove. I'm pretty sure this is the original hardware that should have been holding the plastic piece of the tailgate onto, so you probably already have this tool out. Remove the metal backing.

Use a small flat blade screwdriver to pry up the tabs and release the lock rods from the tailgate.

Using a 10 millimeter socket and ratchet, you can remove the two nuts securing the tailgate handle to the tailgate. You can then pull down and fold the bottom out to remove the handle from the vehicle. Use a small flat blade screwdriver to pry out this snap clip and wiggle the lock mechanism out of the handle.

So our old lock is fine, but if you need a new one, it'll install the same way. Just drop it into the opening. Reinstall your snap ring, and you're ready to reinstall your tailgate handle into your truck.

Reinstall the tailgate handle. You'll then have to set the mechanism back on there. There's some plastic clips on the bottom of the mechanism to lock it into place. Once it's in there, you can reinstall your two 10 millimeter nuts. Tighten them down with the socket and ratchet.

Now, when reinstalling the latch rods, you'll want to pull the slack out of them without actually moving the latch and lock them back into their tabs. Now before we reinstall our back cover, we'll open and close the tailgate a few times to make sure our latch rod adjustment works.

Now, if the tailgate won't close fully on one side, you'll need to back off the adjustment a little bit and give the rod some more slack. Or if it's difficult to open with having this off, you can reach in there and pull it manually to release, and then you'll want to pull a little more slack out of the latch rods.

Reinstall the metal cover. Now, if you have the plastic cover, start by installing the two T30 Torx bolts. If you don't have the plastic cover, reinstall all 10 of your T30 Torx bolts at this point and tighten them down. Now, if you have the plastic cover like we do, reinstall it. You should have eight T30 Torx bolts to reinstall. We have miscellaneous hardware that we'll be putting back in. Close your tailgate and you're good to go.

Thanks for watching. Visit us at for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Star Drivers & Sockets

  • T30 Driver

How to Find and Replace A Blown Fuse in Your Car or Truck

How to Find and Replace A Blown Fuse in Your Car or Truck

Watch this video to learn how to change a blown fuse. The experts at 1A Auto will show you how to locate and change a burnt out fuse in your car or truck.

Search Videos
Go To Top

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.