How to Replace Rear Window Washer Nozzle 2002-10 Ford Explorer
Created on: 2016-10-10
How to remove your window washer nozzle on 02, 03, 04, 05, 06, 07, 08, 09, 10 Ford Explorer
-
step 1 :Removing the Washer Nozzle
- Remove the two Phillips head screws from the third brake light
- Peel the brake light lens off the vehicle
- Disconnect the window washer hose
- Disconnect the brake light wiring harness
- Press the washer nozzle out of the brake light with a flat blade screwdriver
-
step 2 :Installing the Washer Nozzle
- Position the washer nozzle on the brake light with the sprayer pointed down
- Snap the nozzle into the brake light
- Connect the wiring harness to the brake light
- Connect the washer hose to the nozzle
- Insert the two Phillips screws into the brake light
Tools needed
-
Gloves
Flat Blade Screwdriver
Phillips Head Screwdriver
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over thirty years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by a hundred percent satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence, and that saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video we're going to be working with our 2006 Ford Explorer. We're going to show you how to remove your third brake light assembly so you can change out your rear window washer nozzle. If you like this video, please click subscribe. We have a ton more information on this truck as well as many other makes and models and if you need this part for your vehicle you can follow the link down in the description over to 1AAuto.com. Here are the items you'll need for this repair.
To remove the third brake light cover, we'll remove these two Phillips head screws. Once our two screws are out, reach underneath the lens. Carefully peel it up off of the car. Disconnect the hose here for the rear window washer, and the electrical connector at the end by pushing down and pulling it away.
To remove your rear window washer nozzle, simply take a small flat blade screwdriver, press down on one tab while pulling down with your finger. You'll see you get the gap there. Keep pulling down there, press in on the other side, and pull it out of your third brake light housing.
Take your new rear window washer nozzle, being sure that the spray end is facing down into the flat portion of our third tail light. Snap it back into place. Reconnect the electrical connector. The push tab faces into the back of the housing. Reconnect your rear window washer nozzle hose. Lay the cover back into place, and reinstall your two Phillips head screws.
Check for proper operation of your third brake light and rear window washer nozzle, and you're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping and the best customer service in the industry.
How to Remove Washer Fluid Pump 2006-12 Nissan Altima
If your washer fluid on your 06-12 Nissan Altima isn't flowing, you might need a new pump! Watch this video, 1A Auto mechanics will show you how to do it!
