Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How To Replace Rear Hatch Struts 01-06 Suzuki XL-7

Share on:

How To Replace Rear Hatch Struts 01-06 Suzuki XL-7

Created on: 2014-02-24

How to replace a broken, corroded, or worn out rear hatch piston to the Suzuki XL-7, years 01, 02, 03, 04, 05, and 06.

  1. step 1 :Removing the Hatch Piston
    • Open the tailgate
    • Remove the two 10mm nuts from the hatch piston
    • Pull odd the hatch piston
  2. step 2 :Installing the Hatch Piston
    • Put the piston into place on its studs
    • Fasten the 10mm nut that holds the piston to the tailgate
    • Close the tailgate slightly
    • Fasten the 10mm nut that holds the piston to the body

Tools needed for replacement

  • Ratchets & Related

    Ratchet

  • Sockets - Metric

    10mm Socket

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the tailgate piston on this 2002 Suzuki XL7. The only tool that you're going to need for this is a 10mm socket and ratchet.

Start off by opening your tailgate. Right here is your piston. It's held in with two 10mm nuts. We'll just fast forward as Don removes both of those. Once those are removed, the piston pulls free.

Now push your new piston into place and replace that 10mm nut and then tighten it up. Push the tailgate in a little bit and reconnect the other end of the piston and replace and tighten up that 10mm nut. You're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket


How to Remove a Stuck Brake Bleeder Screw

How to Remove a Stuck Brake Bleeder Screw

Watch this video to learn how to remove a brake bleeder screw that’s stuck or rusted on. The experts at 1A Auto will show you how to loosen a stuck screw and bleed your brakes.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...