How to Replace Power Window Switch 1992-99 Buick LeSabre
Created on: 2013-06-15
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switchon a 1992-99 Buick Lesabre.
-
step 1 :Removing the Window Switch
- Disconnect the negative battery cable with an 8mm wrench
- Pry up the switch pack with a flat blade screwdriver
- Disconnect the window wiring harness
- Pry off the connector from the switch
-
step 2 :Installing the Window Switch
- Match up the pins on the switch with the connector
- Connect the switch to the panel
- Push the panel into place
- Connect the negative battery cable
Tools needed
-
Flat Blade Screwdriver
8mm Wrench
8mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a rear-window switch on a '97 Buick LeSabre. It'll apply to the '97, '98, and '99 model year LeSabres, and the procedure from the right door to the left is the same. All you'll need is a small, flat head screwdriver and a new window switch from 1AAuto.
Start by disconnecting your negative battery cable with an 8 millimeter wrench. Use a small pocket screwdriver, flat head, and pry up at the bottom end of the switch pack here and pull it out. There's going to be two clips, one on either side, I'm going to pry up on, pull the switch out.
There's two more clips, right on the inside here, we're going to pry this connector out.
The old switch and the new switch from 1A Auto, identical. It can only go in one way, match up your pins and holes, and snap it back into place.
Feed the front of it in and press down. Finish up by reconnecting your negative battery cable.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Install Master Power Window Switch 2010-17 Chevy Equinox
Remove an old, stuck, or shorted out master power window switch from your 10-17 Chevy Equinox, and replace it with a new, quality, engineered to fit replacement from TRQ. How to do it yourself.
