Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How To Replace Power Window Switch 00-02 Chevy Suburban

Share on:

How To Replace Power Window Switch 00-02 Chevy Suburban

Created on: 2014-05-01

Got a bad master power window switch? This video will show you how to separate it from the trim and install a better working replacement yourself

  1. step 1 :Removing the Switch Panel
    • Pry up the switch panel by hand
    • Disconnect the door lock wiring harness
    • Disconnect the window switch wiring harnesses
    • Disconnect the mirror switch wiring harness
    • Remove the two T20 Torx bolts
    • Pry the top of the switch panel with a flat blade screwdriver
    • Remove the switch panel
  2. step 2 :Installing the New Switch Panel
    • Push the switch panel in the trim
    • Replace and tighten the two T20 Torx bolts
    • Connect the door lock wiring harness
    • Connect the window switch wiring harnesses
    • Connect the mirror switch wiring harness
    • Push in the switch panel to the door panel

Tools needed for replacement

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Star Drivers & Sockets

    T20 Driver

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the driver side switch pack on this 2002 Chevy Suburban. The items you'll need for this include a new power window switch pack from 1AAuto.com and a flat blade screwdriver.

Pry up on your switch panel and lift it forward and out. Then pry out on this tab, pull the harness free, and then push the tabs on these harnesses and pull them free. Then remove these two T20 Torx bolts. We'll just fast-forward as Don does this. Now pry out at the top of the switch panel and just pull the panel down and out.

Take your new switch panel and push the top end in first. Then push the back ends down in, and replace those two T20 torx bolts. Reconnect your harnesses. Then push the back end to your switch panel in first, and then push down the front and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Star Drivers & Sockets

  • T20 Driver

2001 - 2002  Chevrolet  Silverado 3500
2002 - 2002  Chevrolet  Avalanche 1500
2001 - 2002  GMC  Sierra 3500
2002 - 2002  Chevrolet  Avalanche 2500
2001 - 2002  Chevrolet  Silverado 1500 HD
2001 - 2002  GMC  Sierra 1500 HD
2001 - 2002  Chevrolet  Silverado 2500 HD
2001 - 2002  GMC  Sierra 2500 HD
2001 - 2002  Chevrolet  Tahoe
2001 - 2002  GMC  Yukon
2000 - 2002  GMC  Yukon XL 2500
2000 - 2002  GMC  Yukon XL 1500
2000 - 2002  Chevrolet  Suburban 1500
2000 - 2002  Chevrolet  Suburban 2500
2000 - 2000  Chevrolet  Tahoe
2002 - 2002  Cadillac  Escalade
2000 - 2000  GMC  Yukon
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...