Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How To Replace Power Door Lock Switch 04-07 Jeep liberty

Share on:
  1. step : Removing the Door Panel (0:30)
    • Pry up the little access panel behind the inside door handle
    • Remove the Phillips screw exposed, as well as the one in the door pull
    • Pull the door panel firmly to unpin the door panel
    • Disconnect the door latch rod and the wiring harnesses
  2. step : Replacing the Power Door Lock Switch (1:26)
    • Pry up the switch carefully from the door panel
    • Insert the new power door lock switch into place
  3. step : Installing the Door Panel (1:42)
    • Connect the wiring harness leads and the door latch cable
    • Clip the door panel in
    • Secure with the two Phillips screws
    • Clip the access panel back in behind the inside door handle

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi. I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.

In this video, we show you how to replace the power lock switch on this 2006 Jeep Liberty, and the only tools you'll need for this are two flat blade screwdrivers and a Phillips screwdriver. Start off by prying out this little panel behind your door handle. Now, remove this Phillips screw and this one down in your pull cup, and we'll just fast forward as Don does this. Now, pull out around the door panel to release the clips. When you get to the top, pry the door panel out, and once the clip pops free, pull the door panel up and off. On the back of your door panel, you want to release the clip on your door handle rod and pull the door handle rod down and out.

Then, you want to push the tabs on both harnesses and release them. Using one flat blade screwdriver, pry out one side and leave it in there, and then using the other flat blade screwdriver, pry out the other side, and the switch will pop right up and out. Take your new switch. Push it down into place. Now, to replace your door panel, push the harnesses back into place. Push the door handle rod back into place and reclip it. Then, line your door panel up and push it down onto the window seal and over that lock. Now, make sure your clips are lined up and hit them in around the door panel ... and we'll just fast forward here as Don replaces those two Phillips screws, and replaces that little panel behind the door handle.

We hope this video helps you out. Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver


How to Locate Your VIN Number

How to Locate Your VIN Number

This video teaches you where to look on your vehicle to find the Vehicle Identification Number (VIN).

Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...