How to Replace Passenger Window Switch 1995-99 GMC K1500
Created on: 2017-04-04
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 1996 GMC Sierra K1500
-
step 1 :Removing the Power Window Switch
- Pry off the power window switch panel with a trim tool
- Disconnect the tweeter electrical connector
- Disconnect the window switch electrical connectors
- Release the window switch tabs
- Push the switch out of the panel
-
step 2 :Installing the Window Switch
- Pop the switch into the switch panel
- Connect the two electrical connectors to the window switch
- Connect the electrical connector to the tweeter
- Push the switch panel into the door
Tools needed
-
Flat Blade Screwdriver
Trim Tool Set
Pick
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 1996 GMC Sierra. We're going to show you how to remove and replace your passenger power window switch. If you like this video, please click subscribe. We have a ton more information on this and many other vehicles. If you need this part for your truck, you can follow the link down in the description over to 1AAuto.com. Here are the items you'll need for this repair.
Using your trim tool, pry up at the back of the power window switch. Lift it up and pull back to release the hook at the front. Disconnect the connector for your tweeter. Pop up the tab on this two-pin connector at the front of the window switch and pop the connector out. Then push down on the tab for the main connector and remove that from the switch. I'm using a pick here. You could also use a small flat blade screwdriver or a trim tool if you had to, really whatever works best for you. Pry up and release the tabs for the power window switch.
Here's our old window switch that we removed from our vehicle and our new part from 1AAuto.com. As you can see, these parts are exactly the same. Our new switch has some nice bright graphics on it so you can clearly see your lock button and window up and down, whereas our old one is faded and the dust and water shield has peeled off and fallen off. Other than that, the base of the switches is the same, as well as the two electrical connectors and all the circuitry on the back. If your window switch isn't functioning like it should, this new part from 1A Auto is going to go in direct fit just like your original equipment and fix you up right.
Install your new switch by lining it up and firmly pressing it into the switch panel. Reconnect your door speaker as well as the two electrical connections on the power window switch. Slide the front hook into the door panel. Snap the back into place and you're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Shop Products
How to Replace Power Window Switch 2000-05 Chevy Monte Carlo
Find out easy replacing the power window switch can be on the 00-05 Chevy Monte Carlo with this how-to video
