How to Replace Parking Light 2000-06 Chevy Suburban
Created on: 2014-05-07
Check out this video on how to remove and replace the parking and daytime running light on your 00-06 Chevy Suburban.
-
step 1 :Removing the Head Light
- Push the locking rods from the headlight in and pull them up
- Pull the headlight out
- Push the parking light tab in
- Remove the parking light
-
step 2 :Servicing the Bulbs
- Twist the bulb socket counterclockwise out of the light
- Pull the bulb off of the socket
- Push on the new bulb
- Twist the bulb clockwise into the light
-
step 3 :Installing the New Parking Light
- Push the inner parking light tab into its slot first
- Push the parking light into place
- Push the lock rods in their slots on the headlight and turn inwards to lock them
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs, as well as replace the entire parking light assembly on this 2002 Chevy Suburban. It's the same part and similar process on these Suburbans from 2000 to 2006. We show you on the passenger's side, but the driver's side is a similar procedure. The items you'll need for this includes new parking lights from 1AAuto.com, a flat blade screwdriver, a Phillips screwdriver, and a 10mm socket and ratchet.
Start off by removing your headlight. To do that, you just push these rods in, and then lift them up and out. Now you can pull your headlight out. Just reach down behind it, and you can see there's a tab right here on the parking light, just push that in, and your parking light will pop out.
To service the bulbs, you just push the tabs on the socket and turn it. It's counterclockwise to remove it. The bulb pulls straight out. You can push your new bulb in and twist it back into place clockwise to lock it. This middle one is the same, and the one on the end, just pulls straight out, bulb pulls out, new one goes in.
Now, to replace the entire assembly, remove all three of your sockets from the light. On the bottom is the old parking light; above it is the identical match from 1AAuto.com and above that is a performance version we offer. Both parking lights will fit exactly the same as the stock parking light.
Now twist your sockets into your new parking light assembly and push this last one in. Then push this tab in first into this slot right here, and then just push the parking light straight back into place. Line up your headlight and push it back into place. Then push those rods back down in, turn them back inwards to lock them, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Chevrolet Driver & Passenger Side Performance 2 Piece Parking Light Set DEPO M32-1601P-USV
- Chrome Bezel
- Performance
- 2 Piece
- (1) Passenger Side Performance Parking Light
- (1) Driver Side Performance Parking Light
How To Replace Parking Light 1992-98 Chevy Suburban
How to repair, install, fix, change or replace a broken, damaged, cracked, faded, cloudy, or chipped signal light or parking light. This procedure is the same for most 92, 93, 94, 95, 96, 97, or 98 Chevy Silverado and GMC Sierra Pickup Trucks, plus Suburban, Tahoe, and Yukon.
