Created on: 2014-09-22
How to repair, install, fix, change or replace a broken, damaged, cracked, faded, cloudy, or chipped side marker light on 02, 03, 04, 05, 06, 07, 08, 09, 10 Mercury Mountaineer.
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulb as well as replace the entire front side marker light assembly. We show you on the passenger side, but the driver side is the same procedure. The only tool that you're going to need for this is a 10mm socket and ratchet.
To access the bulb, reach up behind the side marker light, twist the socket counterclockwise and pull it out. The bulb just pulls out. Push your new one into place and twist that socket back in clockwise to lock it.
If you're looking to replace the whole assembly just remove these two 10mm nuts, and fast forward as Mike does that. Just push out from behind and pull the side marker light free.
Take the new side marker light assembly and push it into place and replace those two 10mm nuts and tighten them up. Twist your socket back into place, clockwise to lock it.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.