How To Replace Master Window Switch 2002-06 Nissan Altima
Created on: 2013-11-20
Find out how to do this easy repair yourself by following our expert's steps in this instructional video
-
step 1 :Removing the Window Switch
- Pry off the trim piece inside the door pull with a flat blade screwdriver
- Remove the Phillips head screw inside the door pull
- Pry up the window switch panel with a flat blade screwdriver
- Disconnect the window switch wiring harnesses
- Remove the three Phillips screws from the window switch
- Pull the window switch out of the switch panel
-
step 2 :Installing the Window Switch
- Push the window switch into the switch panel
- Insert the three Phillips screws into the window switch
- Connect the window switch wiring harnesses
- Push in the window switch panel
- Insert the Phillips screw into the door pull
- Push in the door pull trim piece
- Push on the mirror base trim piece if it has been removed
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the switch pack on this 2003 Nissan Altima. The only tools you're going to need for this are a Phillips screwdriver and a flat blade screwdriver.
Start off by removing this screw cap right here. Underneath that, there's a Phillips screw. You want to go ahead and remove that. Pry up the switch panel starting at the top here and disconnect the harnesses from the switch panel. Just push down on the tabs and pull the harness out. On the back of the switch panel there are three Phillips screws holding in the switch pack. Go ahead and remove those. With the screws out it comes right off.
Push your new switch pack into place and replace those three Phillips screws. Reconnect your switch panel. Plug the harnesses in and push the switch panel down into place. Replace the Phillips screw in the switch panel. Replace that triangular panel and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Power Window Switch 2001-06 Dodge Stratus
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on Dodge Stratus, years 01, 02, 03, 04, 05, and 06.
