How to Replace Master Window Switch 2002-06 Toyota Camry
Created on: 2011-06-03
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switchon Toyota Camry, years 02, 03, 04, 05, and 06.
-
step 1 :Removing the Switch Panel
- Pry the trap door from the pull handle with a screwdriver
- Remove the Phillips screw from the pull handle
- Remove the window switch wiring harness
-
step 2 :Removing the Window Switch
- Remove the three Phillips screws from the window switch
- Pull the window switch out
-
step 3 :Installing the New Window Switch
- Place the window switch into place
- Install the three Phillips screws
-
step 4 :Reinstalling the Switch Panel
- Reconnect the window switch wiring harness
- Insert and tighten the Phillips screw to the pull handle
- Attach the trap door to the pull handle
Tools needed
-
Phillips Head Screwdriver
Flat Blade Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we'll be showing you how to replace the driver's master window switch on this '05 Camry. You'll need a Phillips screwdriver and a flat blade screwdriver.
Use your screwdriver. We're just going to put it down in there and pry. It may take a couple tries. Pry that little rubber pad out of there and then there's just a Phillips screw right under there. Remove the Phillips screw. This whole panel lifts right up, back, and out. Underneath, you can disconnect your mirror. There's a little tab right there. Then to disconnect this, there's a tab here, which you pull back on and then disconnect it.
Now, my switch works fine, so I'm just going to show you this, but to change your power window switch, there's three Phillips screws. The switch comes up and off. You'll see this is all one piece. You'll see.
Reinstallation: just reverse the procedure. Plug in your gear harness. There's a little collar that slides. You would pull that way back, then put your connector in, slide it down, and lock it on. It just slides forward and down and in. Put your screw back on.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How To Install Replace Master Power Window Switch Honda Accord 1994-97 1A Auto
Watch this video to learn how to replace the master power window switch on your 94-96 Honda Accord.
