How to Replace Master Power Window Switch 2006-11 Honda Civic
Created on: 2017-12-05
New Master Power Window Switch from 1AAuto.com How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 06, 07, 08, 09, 10, 11 Honda Civic
-
step 1 :Removing the Master Window Switch
- Pry up the rear of the switch panel with a trim tool
- Remove the switch panel from the door panel
- Disconnect the window switch electrical connector
- Disconnect the mirror switch electrical connector
- Remove the four Phillips screws from the back of the window switch
- Separate the window switch from the switch panel
- Remove the two Phillips screws from the back of the mirror switch
- Separate the mirror switch from the switch panel
-
step 2 :Installing the Window Switch
- Line up the mirror switch with the switch panel
- Install the two Phillips screws for the mirror switch
- Line up the window switch with the switch panel
- Install the four Phillips screws for the window switch
- Connect the window switch electrical connector
- Connect the mirror switch electrical connector
- Clip the front of the switch panel onto the door panel
- Push the switch panel into the door panel
Tools needed
-
Phillips Head Screwdriver
Trim Tool Set
Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!
To remove this master window switch, there is a tab that is fitting under the door panel on this side and there is a clip on this side. So, it needs to be lifted up this way first, and then lifted out. So, I'm going to use this plastic prying tool. You can get these from 1AAuto.com. Just, kind of, work it underneath the edge of the switch. If you need to, you can go on this side, the outside here. I’m just going to pop it up. Then it's going to lift out backwards. This hook here has to come off.
Push in the locks. Pull this connector out. There's another lock on this side. Undo this connector. Take that out.
So, on the master window switch from the driver's side, you got your four buttons for the four windows: lock, window lock out. There's also the mirror control switch. We flip this over. Those are two separate pieces from this black trim. You can take out the four screws that are holding in the master window switch to remove it from the trim piece. It should pull right out of the trim.
Do the same for the mirror control switch. Remove the two screws, Phillips head screws. That'll lift right out.
Now, reinstall these. Just place it right in place. Put these Phillips head screws back in. These are just self-tapping screws going into plastic, so they should just thread right in. When you feel them get tight, you just stop. No need to over tighten these.
Do the same for the master switch. It should fit right down. Put the screws in.
The other doors are similar. It'd just be a single switch in the trim panel.
It's ready to go back in the car. To install this, plug the large connector back in place. It'll click when it's locked in. Plug the small white connector into here. It'll also click. There's a tab that's going to fit into the door panel on this side first and then a clip that's going to clip down into the door panel. I'll start by fitting it this way, and then pushing it down into the door panel.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Shop Products
How to Replace Power Window Switch 2000-05 Chevy Monte Carlo
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 00, 01, 02, 03, 04, 05, Chevy Monte Carlo.
