1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How To Replace Marker Signal Lights 90-94 Chevy Lumina

Share on:
  1. step : Removing the Side Marker Light (0:47)
    • Pull back the hood shroud
    • Remove the 10mm bolt from the headlight
    • Pull the headlight out
    • Twist the bulb socket out of the light
  2. step : Installing the Side Marker Light (1:51)
    • Service the bulb, if necessary
    • Twist the bulb socket into the light
    • Push the light into place using the locating tab
    • Insert the 10mm bolt into the light
    • Push on the hood shroud

Brought to you by, your source for quality replacement parts and the best service on the Internet.

Hi. My name is Mike Green. I want to help you save time and money repairing your vehicle. I have 20-plus years experience restoring and repairing cars and trucks. My company, 1A Auto, sells high quality replacement parts over the internet. In this video I'll be showing you how to install these parts. By the end of this video, you'll know how to install them and where to get them. That's going to save you time and money. Thank you and enjoy the video.

In this video, we'll be showing you how to replace the side marker on this 1992 Lumina, same for any Lumina of this era. It's pretty easy, and only requires a 10mm wrench.

If you need to change the side marker or blinker on your Lumina, set it up right here. Basically what you got is you pull this panel right up and over. There's a little 10mm bolt right here. You could use a 10mm wrench. I'm just going to use a little help of a quarter inch drive air ratchet here. The light pulls out and as you can see here, you just twist this small piece here and that comes out.

Obviously, if you're looking to service the bulb, you can do that right now. Here's a new light from 1A Auto. Here's the old. You can see how much brighter the new one is.You can see the new light from 1A has the correct mounting tab on it. It has this tab back here and the same terminal for the bulb and everything. To reinstall, take your light, push in and twist. There's a little tab right here, you want to make sure that goes into this slot here. We could start our screw in here and get our air ratchet or wrench. I do the final tightening with the wrench and it's good. Put this panel back in.

We hope this video helps you out. Brought to you by, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Wrenches - Metric

  • 10mm Wrench

How to Tell Shocks and Struts Are Worn - Guide to Test Signs and Symptoms

How to Tell Shocks and Struts Are Worn - Guide to Test Signs and Symptoms

Watch this video to learn how to diagnose your shocks and struts. The experts at 1A Auto show you the signs and symptoms of failing shocks, so you can learn how to check your own suspension.

Search Videos
Go To Top

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.