How to Replace License Plate Light 11-18 Volkswagen Jetta
How to Replace License Plate Light 11-18 Volkswagen Jetta
Created on: 2021-01-16
How to replace a broken, damaged or burnt out license plate bulb to the 11, 12, 13, 14, 15, 16, 17, 18 Volkswagen Jetta
-
step 1 :Removing the License Plate Light
- Pop the housing out
- Disconnect the wiring harness
-
step 2 :Installing the License Plate Light
- Connect the wiring harness
- Press the housing into place with the tab end first
Tools needed for replacement
-
Screwdrivers & Related
Flat Blade Screwdriver
-
Specialty Tools
Trim Tool Set
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
To remove the rear license plate lights, take your plastic prying tool, stick it on the inside of the housing, and just pop it down. This is an LED assembly, so you cannot swap out the bulbs. The entire assembly itself has to be unclipped from the back, and then you simply replace this with a new housing.
Put the new housing in place. This tab, you want to put it on the outside first. Then just pop the light back in.
The opposite side, the driver's side of the car, you want to pry from the outside edge. Pop this out. Unclip your harness. Reinstall your new light. Just press in, and this tab goes on the inside. You want to place it first, then just pop that back in.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools needed for replacement:
- Flat Blade Screwdriver
- Trim Tool Set
Screwdrivers & Related
Specialty Tools
