How To Replace Interior Door Handle 04-15 Nissan Titan
How To Replace Interior Door Handle 04-15 Nissan Titan
Created on: 2021-01-16
How to repair, install, fix, change or replace a broken or snapped off interior door handle on 2004 Nissan Titan
-
step 1 :Removing the Door Panel
- Pry off the trim piece inside the door handle with a flat blade screwdriver
- Pry off the door pull trim piece with a flat blade screwdriver
- Remove the Phillips head screws on the door pull
- Remove the Phillips head screw in the door handle
- Pry up the switch panel with a flat blade screwdriver
- Disconnect the wiring harnesses
- Pull out on the door panel to release the clips
- Disconnect the courtesy light wiring harness
- Disconnect the latch cables from the door handle
-
step 2 :Removing the Door Handle
- Push the trim piece off behind the door handle
- Remove the three Phillips screws on the back of the door handle
- Remove the door handle
-
step 3 :Installing the New Door Handle
- Insert the new door handle into place
- Insert the three Phillips head screws
- Push the door handle panel into place
-
step 4 :Installing the Door Panel
- Connect the latch cables
- Connect the courtesy light wiring harness
- Lift the door panel into place
- Push in the door panel clips
- Connect the wiring harness to the switch pack
- Push the switch pack into place
- Insert the Phillips screw behind the door handle
- Insert the two Phillips screws in the door pull
- Replace the trim piece behind the door handle
- Push on the trim piece on the door pull
Tools needed for replacement
-
Ratchets & Related
Ratchet
-
Screwdrivers & Related
Flat Blade Screwdriver
Phillips Head Screwdriver
-
Sockets - Metric
10mm Socket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an interior door handle on this 2004 Nissan Titan. And we'll show you on the driver's side, but the passenger's side is a similar procedure. The only tools that you'll need for this are a flat blade screwdriver, a 10mm socket and ratchet, and a Phillips screwdriver.
Start off by prying off this little panel back here behind the door handle and then this panel along your pull handle. Then you want to remove this 10mm bolt, this 10mm bolt, and this 10mm bolt right here. And you can use a Phillips screwdriver instead, if you prefer. Using a flat blade screwdriver, pry up on the side of your switch pack, then lift the front up and then slide the back forward. And then push the tab on each of these harnesses and pull them free.
Now pull out along the door panel to release the clips, and lift it up and out of the window seal. And then push the tabs on either side of this harness and pull it free. Then push this forward, lift it up and out, and do the same thing with this one.
On the back of your door panel you'll see this panel next to your door handle, and just push the tabs and it'll fall through. And then remove these three Phillips screws. Once those are removed your door handle will lift up and out.
Take your new door handle and push it down into place. And then replace those three Phillips screws and we'll fast-forward as Don does that. And now push that small panel back up into place.
To replace your door panel, take your lock cable, push it back down into place, and then slide that back into the bracket. And do the same thing with your door handle cable. And then, reconnect your courtesy light and lift your door panel back up onto the window seal, making sure that your switch pack harnesses are going back up through the door panel. And once you have it in place, make sure the clips line up, and just hit them back in.
Reconnect your switch pack, and then slide this tab on the back down in first and then push the front down. Then replace those three 10mm Phillips bolts. Push the small panel behind your door handle back into place, and then the small panel on your pull handle in place, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools needed for replacement:
- Ratchet
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Socket
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
SOLVED Low speed ABS activation Chevy Trucks
If the ABS pump engages and the brake pedal presses further than usual and pumps soft and hard, engaging the antilock brakes, this video has a solution
