How To Replace Ignition Coils 00-05 Toyota Celica
How To Replace Ignition Coils 00-05 Toyota Celica
Created on: 2013-11-06
How to repair, install, fix, change or replace a bad or broken ignition coil / coil pack on Toyota Celica, model years 00, 01, 02, 03, 04, and 05.
-
step 1 :Removing the Ignition Coil
- Make sure you have the correct ignition coil for your engine
- Disconnect the ignition coil wiring harness with a flat blade screwdriver
- Remove the 10mm bolt from the ignition coil
- Pull the ignition coil up and out
-
step 2 :Installing the New Ignition Coil
- Put the new ignition coil into place
- Insert the 10mm bolt into the ignition coil
- Connect the ignition coil wiring harness
- Repeat Steps 1 and 2 for the remaining ignition coils
Tools needed for replacement
-
Ratchets & Related
Ratchet
-
Screwdrivers & Related
Flat Blade Screwdriver
-
Sockets - Metric
10mm Socket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the ignition coil on this 2000 Toyota Celica. It's the same process on the Celicas from 2000 to 2005. There are two types of ignition coils for this vehicle, so make sure you check your engine number and compare it to the engine number given with the part on 1AAuto.com. The only tools that you're going to need for this are a 10mm socket and a ratchet.
Right here are your four ignition coils. You're going to start off. You just pry up the tab and pull the harness right off. Then you just remove the 10mm bolt right here and then the ignition coil just pulls right up and out.
Reinstallation is straightforward, put the coil back in, line up the hole, reinsert the 10mm bolt and tighten it up nice and firm, reconnect the harness, and then repeat that for the other three coils.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools needed for replacement:
- Ratchet
- Flat Blade Screwdriver
- 10mm Socket
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
Shop Products
Ignition Coil Wire Harness 4 Piece Set DIY Solutions IGN00665
Part Details:
- 4 Piece Set
