Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Headlight Switch 06-10 Ford Explorer

Share on:
  1. step : Removing the Headlight Switch (0:46)
    • Pry up the air outlet bezel with a trim tool
    • Remove the bezel
    • Press the tabs down and pull out the switch trim panel
    • Disconnect the wiring harnesses
    • Remove the three Phillips screws from the switch
    • Remove the switch
  2. step : Installing the Headlight Switch (1:50)
    • Press the switch into the panel
    • Tighten the screws to the headlight switch
    • Connect the wiring harnesses
    • Press the panel into the dash
    • Press the air outlet bezel into the dash

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video, we're going to show you how to replace the headlight switch. This is a 2006 Ford Explorer. It’s the same process for Explorers from '06-'10. That generation, as well as Mountaineers.

Please click subscribe. Check out all our other videos for Explorers, Fords, and all kinds of different makes and models. For all your parts needs, check out 1AAuto.com link in the description.

The items you'll need for this repair include: Phillips head screwdriver

First, you'll want to remove the air outlet bezel. You can use plastic trim tools available at 1AAuto.com so it doesn't mar your finish here. Slide it in. The clip’s on there, right in the side, so you want to slide it down, pull out, and twist. Then pull straight out and your louvre comes off.

Then there's two tabs at the top of each side. Push down on the tabs as you push out, and this whole panel comes out. Then you can disconnect the leads on here and this one here has a tab. The headlight switch is held in with three Phillips screws, and we'll remove those. With the screws out, pull it straight out and off.

To reinstall, just make sure your graphics are on top. With the locating tabs, it only really goes in one way. And reinstall your three screws. Reconnect your headlight harness. Reconnect your dimmer harness. Two tabs at the bottom, those go in place first. Then push that in place and the little dimples at the top should be on top so you can see them. Put your AC duct grate in place.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver


Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...