Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Hazard Light Switch 96-04 Nissan Pathfinder

Share on:

How to Replace Hazard Light Switch 96-04 Nissan Pathfinder

Created on: 2021-01-16

How to repair, install, fix, change or replace a broken hazard light switch 00 Nissan Pathfinder

  1. step 1 :Removing the Hazard Switch
    • Remove the two Phillips head screws
    • Gently pry outwards to unclip the trim panel
    • Use a screwdriver to push down on the lock for the switches
    • Disconnect the electrical connections
    • Disconnect the 12V outlet - pull straight out
    • Push on the small tab to unlock the switch
    • Pull straight out
  2. step 2 :Reinstalling the Hazard Switch
    • Line up the hazard switch
    • Press it in
    • Reconnect all the electrical connections
    • Press the trim panel in to lock it in place
    • Snug up the two screws

Tools needed for replacement

  • Screwdrivers & Related

    Phillips Head Screwdriver

Installation Video
Watch video

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years.

We're going to remove this radio trim panel. There's two Phillips head screws right underneath here. There's one right here. There's another one over here. Pull the screws out.

Then you can grab this panel. Just pop it out. You may need a trim tool underneath here. There's a bunch of clips. There's clips up here, clips over here.

We're going to disconnect the electrical connector for the hazard switch on the back. Can you see? I'm just going to use the screwdriver, and push down on the lock, and pull the connector up out for the lock right here. See right there, push down on there.

There's another lock on the rear defroster button. Push that one down. It's right there.

For the auxiliary outlet, the 12 volt auxiliary outlet or cigarette outlet, we'll grab the connector. You can pull that straight out. There's no lock on that. That's the cover.

The hazard switch right here, to get it out you can push on this little tab right here. That will pull that, and then you can push it straight out. There's your hazard switch.

To install the hazard switch, you line it up, and press it in. We're going to connect this electrical connector right here. We'll slide this over here.

Then we're going to connect these other two electrical connectors. The wide one is going to go to the bottom for the rear defrost. Lock that one in, and then connect the top one for the hazard switch. That's all lined up.

We can take our two Phillips head screws. Screw this in down here. One screw here, one screw on the other side. Snug those up. That's good. Turn the power on, and it works.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver


How to Properly Bleed Engine Cooling System by yourself

How to Properly Bleed Engine Cooling System by yourself

Watch this video to learn how to bleed your engine cooling system. The experts at 1A show you how to bleed the air bubbles from your radiator and cooling system.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...