How to Replace Front Wiper Blades 2010-15 Toyota Prius
Created on: 2017-12-20
How to repair, install, fix, change or replace a damaged, bent, or failing windshield wiper blade on 11 Toyota Prius
-
step 1 :Removing the Wiper Blade
- Pop open the tab on the blade
- Lay the blade horizontally
- Press the push tab
- Slide the blade down
- Pull the blade up and off
- Lower the arm to the windshield
-
step 2 :Installing the Wiper Blade
- Slide the wiper blade on the wiper arm
- Press the tab in to lock the blade
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Both wiper blades can be removed in the same way. Just lift them up off the windshield and put a small, flat bladed screw driver here. Pop this little locking tab off. And we can flip it this way. And there should be a push tab on the inside. To unlock it, pull it down and out, and slide it right off.
To reinstall it, we're going to slide the wiper blade up and into the hook—this will click when it locks into place. And then we'll just close this little door here. Snap shut, and lay the wiper blade back down on the windshield. Repeat that for the passenger side, and you’ve replaced your wiper blades.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Squealing Vent Noise in Your Car or Truck How to Check Blower Motors
Andy shows you the difference between an old blower motor with a worn bearing, and a brand new blower motor, to see how and old one can make that awful noise.
