How to Replace Front Upper Control Arm 2008-12 Jeep Liberty
Created on: 2019-11-21
You may be surprised to hear you need to replace a control arm, especially if the vehicle is never driven hard, or has been in an accident. More often than not, the arm is in fine condition, but the bushings or ball joint have worn out, causing noise, play in the wheel, or other unsafe conditions. How to install a new TRQ upper control arm in your 2008-12 Jeep Liberty.
Tools needed
-
Torque Wrench
Hammer
Socket Extensions
18mm Wrench
Pry Bar
18mm Socket
19mm Socket
Trim Tool Set
Pick
21mm Socket
Locking Pliers
8mm Socket
Ratchet
Swivel
1/2 Inch Impact Gun
Shop Products
Jeep Liberty Dodge Nitro Front 8 Piece Steering & Suspension Kit TRQ PSA66373
Part Details:
- (2) Front Sway Bar Links
- (2) Front Outer Tie Rods
- 8 Piece
- (2) Front Lower Control Arms with Ball Joints
- (2) Front Upper Control Arms with Ball Joints
How to Replace Lower Control Arm 2000-06 Chevy Suburban 1500 SUV
Watch this video to learn how to replace a loose, rusted, or damaged control arm. The experts at 1A Auto will show you how to replace the lower control arm on your 00-06 Chevy Suburban or Silverado, or GMC Yukon or Sierra.
