1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Front Rear Wiper Blades 10-16 Cadillac SRX

Share on:

How to Replace Front Rear Wiper Blades 10-16 Cadillac SRX

Created on: 2021-01-16

How to repair, install, fix, change or replace a damaged or old windshield wiper bladeon 13 Cadillac SRX

  1. step 1 :Removing the Wiper Blade
    • Lift up the wiper arm
    • Press the tab on the wiper blade
    • Slide the wiper blade up and off the arm
  2. step 2 :Installing the Wiper Blade
    • Slide the wiper blade down onto the arm
    • Check that it is secured
  3. step 3 :Removing the Rear Wiper Blade
    • Release the clips from the cover of the rear wiper blade
    • Slide the cover toward the driver side and remove it
    • Press the tab on the rear wiper blade with a flat blade screwdriver
    • Slide the wiper blade toward the passenger side
  4. step 4 :Installing the Rear Wiper Blade
    • Slide the wiper blade up onto the arm
    • Check that it is secured
    • Snap the cover onto the rear wiper blade

Tools needed for replacement

  • 1A - No Tools Needed

    No Tools Needed

Installation Video
Watch video

Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

To remove the wiper blade, you can pull the arm up so you can have it in service mode, and you can push down on this little button here and slide the blade out. Sometimes it's a little bit tricky if it's a little dirty.

To install the wipers, line this back up and lock it in place. You can push it back down. We're going to do the same for the passenger side. Pull this up, push the button down, and pull the blade out.

To reinstall, line it up and lock it in place.

To remove the rear wiper blade, there's a cover over here. We're going to grab with two hands on the sides here. There's some clips that hold this cover on. Pull this cover off. The clips are on the side here. And then it moves forward, right there. To get this blade up, there's a little tab right here. You can use a small screwdriver and just pry up on it. And then wiggle the blade back and forth. Push it and the pull the blade right out.

To install the blade, you're going to line this arm up in that little slot there, and pull it toward the outside and lock it in. To install this cover we want this to go in this little slot, so line that up, push it towards the right side of the vehicle, and then we'll push it down on the back and lock it in.

Thanks for watching. Visit us at for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.