How to Replace Fog Lights 2004-05 Chrysler Pacifica

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to service the fog lights on this Chrysler Pacifica. We show you both, if you're just looking to change a bulb or if you need to replace a broken light with a new light from 1A Auto.

The fog lights are pretty easy. If you look right up under here, you'll see the Phillips screw. Use a Phillips screwdriver. Use it to put some pressure up and get the screw going. A lot of times there's a lot of sand and stuff in there. It kind of makes the screw stick a little bit. Pull that screw out. Grab the light, shake it around a little bit and pull it out.

Pull it some more and the bulb just connects right in there. Pry up on the tab. Disconnect it. If you're just looking to just replace the bulb, turn the bulb counter clockwise, pull it out. Put the new bulb in.

If your light's been broken, obviously, you need to remove the remains of the light. You can see the new from 1A Auto is the exact same as the original. It's going to go right in. Make sure you plug it in securely first. There's just two tabs that hold it back in the back. You just have to put it up in straight. Put your screw back in. Then you are all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.