How To Replace Fog Light Switch 2000-06 Chevy Suburban

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the fog light and washer switch on this 2002 Chevy Suburban and the only tool you'll need for this is a flat blade screwdriver.

To start off, we need to remove the dash panel so just make sure your steering wheel is horizontal, pull down your shifter all the way down and then just pull out on this panel. You want to slide it forward and up and over the steering wheel. Using your flat blade screwdriver, pry out at the top of the fog light washer switch, and then, pry out at the tab on the bottom of the switch, and pull it forward. Then to disconnect this harness just pull up on the tab and pull it free.

Take your new switch, connect the harness and push the switch back into place. Take your dash panel and put it up over the steering wheel and then tuck it down behind that steering column. Line up the panel and push it back into place. You're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.