1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Fog Light Assembly 13-17 Ram 1500

Share on:
  1. step : Removing the Fog Light Assembly (0:26)
    • Remove the electrical connection
    • Remove the three 10mm bolts
    • Pull straight out on the assembly to remove it
    • Unclip the harness if applicable
  2. step : Reinstalling the Fog Light Assembly (2:43)
    • Line up the assembly
    • Push it in
    • Snug up the 10mm bolts
    • Reconnect the electrical connection
    • Position the wiring harness in the original location
    • Adjust as necessary
    • Test the lights to make sure they work

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years.

To get to your fog light bulbs, this will be the same on both sides. Go up here. There is a white clip that's locking the connector to the bulb. It's actually kind of gray. Lift it up, and then push the connector back to unlock it.

With the light unplugged, we can remove the three bolts holding the fog light in place. They're 10 mm, I'm gonna use a 10 mm socket extension and ratchet. Start with this top one here. Do the same for the other two.

The fog light assembly is going to start to get really loose. Gonna hold it with one hand, so it doesn't fall out. Get this bolt out of here.

With those bolts removed, we can pull the fog light right out of here. The harness is clipped to it, so we'll pull it off like that and just slide it right out.

Here's our original fog lamp, driving lamp assembly from our vehicle, and our brand new replacement one from 1A Auto. Comes with a bulb. This is how you would adjust the aim. The bracket is the same, has this protective plastic on here, we can peel this off. This is the passenger side, but the driver's side is identical, and the procedure to replace it is very similar, just the opposite side. This is gonna work great, fit great and look great in your vehicle.

We're gonna reinstall this. Here's a little locating pin above this bolt hole here, and there's a corresponding opening in the bracket that's inside the bumper.

We're ready to put this in, we'll go up inside and this edge is gonna slide in just like that. And then the tab is gonna locate it right there. I'm gonna grab one of the bolts, I'll start with one of these top ones on the inside, 'cause it's started by hand.

And I'll do the same for the other two. Don't want to crack the plastic. Once you feel it get tight, you can stop. And the final one. And the harness up in place here. It'll slip back in and then, of course, plug it back in to the light so it works. It won't really snap, but make sure it locks in place.

You need to adjust it, and you can turn this up or down to adjust the aim. The job is complete, the other side will be very similar.

Thanks for watching. Visit us at for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

2013 - 2018  Ram  1500 Truck

13 Ram 1500 Pickup Fog/Driving Light LH

2013-18 Ram 1500 Driver Side Fog Light DEPO

This part replaces:

  • TYC 19-6040-00
  • Hollander 116-03371L
  • Partslink CH2592147
  • DEPO 334-2020L-AF
  • OE # 68104821AC
  • DEPO 334-2020L-AC

Part Details

Fuel Pump Connector Issue Tips

Fuel Pump Connector Issue Tips

Learn a few tips about connecting a fuel pump adaptor in your GM vehicle in this 1A Auto video.

Search Videos
Go To Top

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.