Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Fog Light 94-03 Pontiac Grand Prix

Share on:

How to Replace Fog Light 94-03 Pontiac Grand Prix

Created on: 2011-10-07

If the fog light bulb or the lens needs to be replaced, our experts will show you how in this video

  1. step 1 :Servicing the Fog Light Bulb
    • Twist the fog light bulb socket counterclockwise and out
    • Pull the bulb out of the socket
    • Insert the new bulb into the socket
    • Twist the socket clockwise into the fog light if you are only servicing the bulb
  2. step 2 :Removing the Fog Light
    • Pull the stud protectors off of the fog light studs
    • Remove the two 10mm nuts from the fog light studs
    • Pull the fog light out from the front of the bumper
  3. step 3 :Installing the New Fog Light
    • Compare the adjusting screw of the new fog light to that of the old fog light
    • Turn the adjusting screw on the new fog light until its position is the same as on the old fog light
    • Push the new fog light into place from the front of the bumper
    • Twist the fog light bulb clockwise into the new fog light
    • Fasten the two 10mm nuts onto the fog light studs
    • Connect the fog light wiring harness

Tools needed for replacement

  • Ratchets & Related

    Ratchet

  • Sockets - Metric

    10mm Socket

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video we're going to show you how to replace the fog lights, both if you just want to replace your bulb, and as well as if your fog light got wiped out by a slight accident or they often get taken out by rocks and things like that. The only tool you'll need is a 10 millimeter socket with a ratchet.

You'll see I've got the car up on a lift. That's not necessary. It just makes it a whole lot easier to film for you. If you're just looking to change the bulb in your fog light, what you're going to want to do is reach up underneath. This is your aiming screw. You want to feel right above that, and that's your bulb. Turn counterclockwise and pull it back. Obviously to replace that. There's a little tab there. Pull that with your thumb, disconnect the bulb, and then obviously put the new on one. This bulb is fine. Put the bulb back in. Put it up in there and actually look through your fog light. Get it started up in there, first. You look through your fog light. You see the bulb coming through, and then you can see the shape of the connector, so you can kind of turn your fog light as you need to. Get it in there, then turn it clockwise, and lock into place.

If you're looking to remove your or replace your entire fog light, pull your bulb or what's left of your socket out. Then right here, you can see mine have never been out before, obviously. There are two 10 millimeter nuts. You want to pull these protectors off the ends of the studs and then remove those two 10 millimeter nuts. We're going to speed it up. Use your socket and ratchet to loosen up the bolts. Then you can probably take the ratchet handle off, and just use the socket and your fingers to get it most of the way off until they start coming real easy, and then just use your fingers to pull them out. Push both forward, and the light comes out.

Here's our old light and a new light from 1A Auto. Whatever your motivation -- these fog lights do get wiped out quite often, or you just want to replace it with a new light just because it's nicer, fresher, to make your car look a little cleaner. The only thing you want to do before you put it in . see, we've got a new bulb and our new light. Just kind of measure the distance between here and here and adjust this screw so it's the same as your old light. That just gives you a good preliminary aim. Then put our new light back in place. Pull the old bulb down. Disconnect it. This part is just the reverse of the original procedure. I'll speed it up here again. With the new light, the nuts should probably go on most of the way by hand, and then just tighten them up with the ratchet and socket. Now connect the lead in the fog light. The new fog light looks quite nice tucked in there.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket


How to Replace Headlights 02-05 Dodge Ram 1500

How to Replace Headlights 02-05 Dodge Ram 1500

Watch this video to learn how to replace a cloudy or cracked headlight or change a burnt out bulb. The experts at 1A Auto teach you how to replace the headlights on your 02-06 Dodge Ram.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...