How To Replace Door Lock Button 2004-13 Nissan Titan
Created on: 2014-04-11
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power door lock switch on 2004 Nissan Titan or Armada.
-
step 1 :Removing the Door Panel
- Pry off the panel inside the door handle with a flat blade screwdriver
- Pry off the door pull panel with a flat blade screwdriver
- Remove the 10mm bolt from inside the door handle
- Remove the two 10mm bolts from the door pull
- Pry the window switch off with a flat blade screwdriver
- Disconnect the window switch wiring harness
- Pry off the door panel by hand
- Lift the door handle off the window sill
- Disconnect the courtesy light wiring harness
- Disconnect the door latch cable
- Disconnect the door lock cable
-
step 2 :Replacing the Manual Lock Switch
- Undo the lock switch tabs
- Push the lock switch out of the door panel from behind
- Push the new lock switch into the door panel from the front.
-
step 3 :Reinstalling the Door Panel
- Connect the door lock cable
- Connect the door latch cable
- Connect the courtesy light wiring harness
- Lift the door panel onto the windowsill, pulling the window switch wiring through the cavity
- Push the door panel clips in
- Reconnect the window switch wiring harnesses
- Push the switch panel in, starting at the back
- Insert the 10mm bolt inside the door handle
- Insert the two 10mm bolts into the door pull
- Push the door handle trim panel back on
- Push the door pull panel on
Tools needed
-
Flat Blade Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the manual lock switch on this 2004 Nissan Titan. We show you on the driver's side, but the passenger's side is a similar procedure. The only tools you'll need for this are a flat blade screwdriver and a 10mm socket and ratchet.
Start off by prying off this little panel back here behind the door handle and then this panel along your pull handle. Then you want to remove this 10mm bolt, this 10mm bolt, and this 10mm bolt right here. You can use a Phillips screwdriver instead if you'd prefer. Using a flat blade screwdriver, pry up on the side of your switch pack. Then lift the front up and then slide the back forward, and then push the tab on each of these harnesses and pull them free. Now, pull out along the door panel to release the clips and lift it up and out of the window sill. Then push the tabs on either side of this harness and pull it free. Then push this forward, lift it up and out and do the same thing with this one.
Flip your door panel over and push the tabs on your manual lock switch and just push it through the panel. Then take your new switch and push it up into place.
To replace your door panel take your lock cable, push it back down into place, and then slide that back into the bracket, and do the same thing with your door handle cable. Then, reconnect your courtesy light. Then lift your door panel back up unto the window sill, making sure that your switch pack harnesses are going back up through the door panel. Once you have it in place make sure the clips line up and just hit them back in. Reconnect your switch pack. Then slide this tab on the back down in first and then push the front down. Then, replace those three 10mm Phillips' bolts. Push the small panel behind your door handle back into place and then the small panel in your pull handle in place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Power Door Lock Switch 2006-10 Ford Explorer
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power door lock switch on 06, 07, 08, 09, 10 Ford Explorer
