How to Replace Dome Light Bulb 00-06 Toyota Tundra
How to Replace Dome Light Bulb 00-06 Toyota Tundra
Created on: 2021-01-16
How to replace a broken, damaged or burnt out dome light bulb to the 03 Toyota Tundra
-
step 1 :Removing the Map Light Bulb
- Pop the cover off with a flat blade screwdriver
- Pull the tab back and remove the bulb
-
step 2 :Installing the Map Light Bulb
- Pop the bulb into place
- Press the map light cover on by connecting it to the tabs and pressing up
Tools needed for replacement
-
1A - No Tools Needed
No Tools Needed
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Hey, everyone. Sue here at 1A Auto. Today we're going to show you how to change a dome light in our '03 Tundra. If you need any parts for your car, click on the link below and head on over to 1AAuto.com.
I like to use a flathead screwdriver, like a pocket screwdriver, and just pull out on the lens. Pull it down. You've got the two back tabs and the locking tabs by the front by the handle. Then you expose the bulb. I'll grab it with my two fingers. You can push down on this tab, and then there's the bulb.
To reinstall, you're going to put the, there's a little slotted tab there, and it's on the one there. You put this back one in first. You can slide it up on that tab. Let's make sure it works. Put the cover back on. You're going to bring those two center tabs in the back, and then snap it up.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools needed for replacement:
- No Tools Needed
1A - No Tools Needed
