1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

installation video player icon

How to Replace Corner Light 1997-99 Toyota Camry

Created on: 2010-03-04

In this video, 1A Auto shows you how to replace a broken, damaged, cracked, faded, cloudy or chipped signal light in a 97-99 Toyota Camry.

  1. step 1 :Remove the parking light
    • Use a flat blade screwdriver to remove the push pin above the parking light.
    • Pull the parking light out to unclip it from the fender.
    • With a rag or cloth to protect your paint, pry the parking up from the headlight with your flat blade screwdriver
    • Unplug the wiring harness and the bulbs.
  2. step 2 :Install the parking light
    • Plug the bulb in and connect the wiring harness.
    • Clip the parking light back into place
    • Secure with the push clip.

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money preparing and maintaining your vehicle. I'm going to use my 21 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.

In this video we'll be replacing the parking light on this 98 Toyota Camry, with the lovely snow falling around it, same as any 97 to 01 Camry. The only tool you'll need is a flat blade screwdriver. Remove the parking light by using a screwdriver. The little clip right on here on top, you pull up the middle of the clip top and then you get under the clip and pull it out. Actually at this point the parking light is just clipped in to the headlight and the fender, so you'll to want to firmly- it's a little hairy here- but just firmly pull out on that. Now I've got to unclip it from the fender, thread on the headlight and reach in and then gently loose the headlight and pop it off. Then, the bulb twists out of the parking light, and there.

You could now replace your parking light or service the bulb if you need to by twisting it and pulling it out. To install the parking light put the bulb back in and twist to lock it. Then you have a tab here that's going to go into here, and then this tab is going to go into the headlight. First you've got to work that underneath, put the light up against the fender and up against the headlight. Just make sure you get everything lined up all right. It should too high or too low there, and it falls back in. Then you've got your clip. Pull the middle up, push the clip down and it's locked in place, and there you go.

Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Feel free to call us toll free 888-844-3393. The company that's here for you on the internet and in person.

2000 - 2001  Toyota  Camry
1997 - 1999  Toyota  Camry

recommended video

How To Replace Parking Light 1992-98 Chevy Suburban

How to repair, install, fix, change or replace a broken, damaged, cracked, faded, cloudy, or chipped signal light or parking light. This procedure is the same for most 92, 93, 94, 95, 96, 97, or 98 Chevy Silverado and GMC Sierra Pickup Trucks, plus Suburban, Tahoe, and Yukon.

Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.