How to Replace Corner Light 2002-04 Ford F250 Super Duty
Created on: 2011-11-11
Check out this video to learn how to replace both the corner light bulbs and assembly on your 02-04 Ford F250 Super Duty.
-
step 1 :Removing the Parking Light
- Remove the two Phillips screws from the parking light bracket
- Pull the parking light out
-
step 2 :Servicing the Bulbs
- Twist the bulb socket counterclockwise out of the light
- Pull the bulb off of the socket
- Push on the new bulb
- Twist the bulb clockwise into the light
-
step 3 :Installing the New Parking Light
- Line up the holes on the parking light bracket to the bolt holes on the vehicle
- Replace the two Phillips screws into the parking light bracket
Tools needed
-
Phillips Head Screwdriver
Flashlight
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to take you through servicing the parking light, the lower parking lights, underneath the headlight as well as the side marker lights. You may need to do this if you've had a little fender bender, or if they're just cloudy and dull and you want to change them and make them look nice. The only tool you'll need is a Phillips screwdriver.
First you're going to find two screws underneath. One there and then one right back in there. Okay, I'm going to fast-forward as I remove those screws. They will tend to drop down. They're kind of hard to get to back in there, so either a magnetic tipped screwdriver will help you or just make sure the area underneath is clear so when they drop on the floor you can find them easily. Also, a flashlight or some other kind of light to help you look back in there and see them.
This comes out. This bulb twists off and out. To service either one of these bulbs, I just pull it out.
All right. New parking light from 1A Auto. See? Nice and clear. Exact fit. If your old one is broken, or if you're replacing your old and cloudy ones, this will let's see. You've just got to put this in correctly. Put your light in. Socket to the right clock position here. Once you insert the bulb then turn it clockwise to lock it and then the same thing with the small side marker light.
Insert it and clockwise to lock it into position. There's a pin here and a pin over here. Make sure those go in like they're supposed to go. Probably the most fun part is just getting these screws in. This one's probably by far the most difficult. I take it, get it on my screwdriver, and I hope it stays. You can also put a little bit of glue on the tip of your screwdriver. I'll help the screw stay on it while you put it in there.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Turn Signal 1998-2000 Toyota Sienna
Watch this video to learn how to replace the turn signal lights on your 98-03 Toyota Sienna.
