How To Remove Rear Door Panel 2004-12 Chevy Colorado
Created on: 2012-11-05
How to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more. This video, will help you do this.
-
step 1 :Removing the Door Panel
- Remove the two Phillips screws in the door pull
- Remove the Phillips screw in the door handle
- Pry off the door handle bezel
- Pull up the door pull and switch panel
- Disconnect the window wiring harness
- Pry out the door panel
- Lift the door panel up and off
-
step 2 :Installing the Door Panel
- Lift the door panel into place
- Push in the door panel clips
- Connect the window wiring harness
- Push the switch panel in place
- Push on the door handle bezel
- Tighten the Phillips screw in the door handle
- Tighten the Phillips screw in the door pull
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video I'm going to show you how to remove and reinstall a rear door panel on this Chevy Colorado. It's pretty easy. The only tool you'll need is a Phillips screwdriver.
First, there's two Phillips screws down there, remove those, and you'll also remove a Phillips screw right in there. We'll fast-forward here as I remove those three screws. Okay, once you pull this up there's a little button right here, just disconnect that harness. Start down here and pull firmly around and the panel comes off, up, and out.
Now, door panel, make sure it's up on the windowsill here against the window. Make sure our wire's through. Kind of peek back in, so you see the clips go in. Okay, right around. We can plug our switch back in. Clip the bezel right back down and on. Put this one right back in place. We'll fast-forward here again as we tighten up those screws; like to tighten them up nice and firm. You don't want to make them too tight, you could break some of the plastic, but you want them nice and firm so that your door feels nice and solid when you open and close it.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
