How to Pin Ev6 Fuel Injector Connector

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

When initially pinning one of these fuel injector repair pig tail harnesses, you'll want to make sure that this center plate is up and free. See, we can wiggle it around there with a flat pick. If you try to install this onto your injector, to check, it'll lock down and you won't be able to move it, and the wires for the harness won't seat fully in.

Ensure that this is up and in the unlocked position. Insert the terminals in—they'll only fit in one way. Push them in until you hear that click. Give them a little tug to make sure they're not coming out. Do the same thing with the other side. Then push down this center plate. Make sure that your terminals are nearly flush with the ends.

Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.