How To Install a Chrome Tailgate Handle 2004-14 Ford F150
Created on: 2014-10-30
How to repair, install, fix, change or replace a broken or snapped off tailgate handle on 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Ford F150 pickup truck.
-
step 1 :Removing the Tailgate Panel
- Remove the six T30 Torx bolts from the tailgate liner
- Pull off the tailgate liner
- Remove the two T30 bolts from the tailgate panel
- Lift off the tailgate panel
-
step 2 :Removing the Tailgate Handle
- Remove the two 10mm nuts from the tailgate handle
- Pull the tailgate handle off the latch mechanism
- Pull off the tailgate handle
- Pull out the lock cylinder clip
- Pull the lock cylinder out of the handle
-
step 3 :Installing the Tailgate Handle
- Push the lock cylinder into the handle
- Put the tailgate handle into place
- Push the tailgate handle onto the latch mechanism
- Fasten the two 10mm nuts onto the tailgate handle
- Test the tailgate
- Remove the plastic coating from the handle
-
step 4 :Installing the Tailgate Panel
- Put the tailgate panel into place
- Insert the two T30 bolts into the tailgate panel
- Put the tailgate liner into place
- Insert the six T30 bolts into the tailgate liner
Tools needed
-
Flat Blade Screwdriver
T30 Driver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the tailgate handle on this 2005 Ford F150. It's the same part and similar process on these F150s from 2005 to 2013. The items you'll need for this is a new tailgate handle from 1AAuto.com, 10mm socket and ratchet, T30 torx bit or driver, and a flat blade screwdriver.
Start off by removing these eight T30s and depending on your bed liner, you may be able to only access six of them at first. Once you remove those six and pull your bed liner away, you can then remove the two underneath it. Flip this panel out of the way and then remove this 10mm nut and this 10mm nut. We'll fast forward as Mike does that. Now just lift up on the latch and pull the handle studs out of there and then just maneuver the handle until you pull that top part down and out. Pull out this clip and lift your lock cylinder out.
On the left is the old tailgate handle. On the right is the chrome one from 1AAuto.com and it will fit exactly the same. Push your lock cylinder into the tailgate handle and feed the tailgate handle up into the door, lifting the latch up. Once you get the handle up and in, push the latch down onto the studs and replace those two 10mm nuts. Then just tighten those, checking every once in a while that it's staying lined up. Now just test it out. Make sure that it locks and unlocks. Then you can remove this plastic.
Take this panel, put it back into place and line it up and then replace the bolts to hold it in place. Then replace your bed liner and the bolts that go through that into this panel.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Tailgate Handle Bezel 1988-2000 GMC Sierra K1500
How to repair, install, fix, change or replace a broken or snapped off tailgate handle on 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00 GMC Sierra K1500
