1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Change Fog Light Bulbs 09-15 Honda Pilot

Share on:

How to Change Fog Light Bulbs 09-15 Honda Pilot

Created on: 2018-06-19

How to replace a broken, damaged or burnt out fog light bulb to the 10 Honda Pilot

  1. step 1 :Removing the Fog Light Bulb
    • Use a trim tool to remove the plastic trim around the fog light
    • Use a Philips head screwdriver to remove the two screws
    • Pull straight out on the fog light
    • Disconnect the electrical connection
    • Turn the bulb counterclockwise to remove it
  2. step 2 :Reinstalling the Fog Light Bulb
    • Line up the bulb and insert it
    • Twist it clockwise to lock it in place
    • Insert the fog light assembly in
    • Tighten up the two screws
    • Line up the plastic bezel and snap it in place

Tools needed for replacement

  • Specialty Tools

    Trim Tool Set

Installation Video
Watch video

Hi. I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.

In this video, we are going to show you how to replace the front fog light bulbs in a 2010 Honda Pilot. If you need parts for your vehicle, click the link in the description, and head over to We're going to take this fog light trim cover off. We're going to use a trim tool. We actually sell these at in a kit.

What we'll do is, there's two little areas right here and right here. Go underneath there with your fingers near the lens. We can pull it out. It comes right out. There's all these clips that are around.

We're going to use a Phillips head screwdriver to take these two screws out right here. Get those two screws out. We can grab the fog light on this side and pull it straight out. There's the connector on the back. We're going to push down on the connector and pull it out. To replace the fog light bulb, we're going to take it and turn to the left. Pull it out, and there's the bulb.

This is an H11 bulb. You want to make sure when you're replacing it you do not touch the glass part. You don't want to get the oils from your hands on it. That will cause the bulb to burn out faster.

To reinstall, we'd align this wider tab up with this slot right there. Get it in, and then we're going to twist it to the right. We're going to connect the connector to the fog light. Just snap it in. You want to pay attention to these two tabs. Those are going to go in here. Make sure your screw holes are lined up. Now we're going to put the screws in right here. Before you tighten that one up completely, we'll put the other screw in. Make sure the holes line up. Now we can tighten them both down. Just snug it down. Remember, it's plastic, so don't tighten it too much. Now we're going to install our bezel and align these two tabs up top first. Then lock it in.

Thanks for watching. Visit us at for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Specialty Tools

  • Trim Tool Set

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.