How to Replace Windshield Wipers 2007-13 Chevy Silverado
Created on: 2018-11-30
How to repair, install, fix, change or replace a broken,damaged, or failing windshield wiper bladeon 07, 08, 09, 10, 11, 12, 13 Chevy Silverado
-
step 1 :Removing the Windshield Wiper Blade
- Lift the wiper arm up
- Press the two tabs on the blade with a flat blade screwdriver
- Turn the blade horizontal
- Lift the blade up from the wiper arm
- Carefully lay the wiper arm down
-
step 2 :Installing the Windshield Wiper Blade
- Slide the blade onto the wiper arm
- Clip the blade onto the arm so it locks
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
What's up, guys? I'm Andy from 1A Auto. Today I'm going to show you how to replace the wiper blades on this 2008 Chevy Silverado.
If you need parts for your vehicle click the link in the description and head over to 1aauto.com
All right, to remove this wiper blade, slide this arm up and I'm going to take a straight blade screwdriver. Underneath here, there's these little tabs. Once I get the blade out, I'll show you them a little bit better. And then, so you're going to slip it up like that and then slide this off up here like that.
These two little tabs right here, if you can grab them with your fingers and push them in, so you just use the screwdriver to push those in and then you rock this up. That's how you get it up.
To reinstall, I'm just going to slide this tab in to the front of the wiper blade first and then slide it into position. Make sure those locks underneath lock underneath. There's two little tabs under there, make sure those are in position. You can wiggle it a little bit to make sure it's good and you'll do the same for the passenger side.
Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping and the best customer service in the industry.
Why you Should Replace Not Restore Headlights
See why replacing your cloudy headlights with new ones is always better than refinishing them Why should you replace your headlights and not clean or refinish them? Three reasons: It's a simple fix, it increases visibility, and it enhances the overall look of your vehicle. Headlights are made from a polycarbonate plastic that can be damaged by UV rays from the sun or suffer pitting caused by road debris light salt and rocks. If you look closely at an old set of headlights, you'll see that the lens is full of micro-cracks. This is called crazing. This crazing, along with pinning, will turn your headlights from crystal clear to hazy yellow and it cuts the output in half, making it very difficult to see at night. It also makes your car look old and dated. With parts from 1AAuto.com and our how-to videos, you can make your vehicle look new and stay safe on the road. To get new headlights for your vehicle, visit 1AAuto.com and visit our YouTube page for do-it-yourself and how-to videos.
