Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Windshield Wiper Arms 05-10 Chrysler 300

Share on:

How to Replace Windshield Wiper Arms 05-10 Chrysler 300

Created on: 2017-02-17

How to repair, install, fix, change or replace a damaged, bent, or failing windshield wiper armon an 05, 06, 07, 08, 09, 10 Chrysler 300

  1. step 1 :Removing the Wiper Arm
    • Mark the placement of the wiper arm with painter's tape
    • Remove the cap on the wiper arm
    • Remove the 15mm nut on the wiper arm
    • Push down on the joint of the arm to loosen it
    • Remove the arm
  2. step 2 :Installing the Wiper Arm
    • Insert the wiper arm to the studs
    • Tighten the 15mm bolt
    • Press on the wiper arm cover

Tools needed for replacement

  • Materials, Fluids, and Supplies

    Painter's Tape

  • Ratchets & Related

    Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Sockets - Metric

    15mm Socket

Installation Video
Watch video

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video, we're going to be working with our 2006 Chrysler 300. We're going to show you how to remove and replace your vehicle's wiper arms.

If you like this video, please click Subscribe. We have a ton more information on this and many other vehicles, and if you ever need parts for your car, you can follow the link down in the description over the 1AAuto.com.

Here are the items you'll need for this repair: painters tape, flat blade screwdriver, 15mm socket, ratchet

Before removing your wiper arm, use a small piece of tape on your windshield. I like to use painter's tape. Mark the edge and the angle of your wiper blade, so when we reinstall the arm we can make sure it's in about the same place.

Take a small flat blade screwdriver and pop the cap off the end of your wiper arm and remove the nut. Using a 15 millimeter socket and ratchet, loosen and remove the nut on the end of your wiper arm. Once the nut is out, push down on the joint of the arm to loosen it from the splines and remove it. Repeat these steps with the opposite wiper arm.

Reinstall your wiper arms. They are different. The one with the shorter leg here where the hinge is goes on the passenger side. Line it up to the tape mark you made. Reinstall the 15-millimeter nut. Hold it in place and use your 15-millimeter socket and ratchet to tighten it back onto the splines. Reinstall the caps on the ends of the wiper arms. Remove your tape from your windshield.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket


Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...