Created on: 2014-02-14
How to repair, install, fix, change or replace a broken, bent, damaged, failing or squeaking windshield wiper arm on Suzuki XL-7, years 01, 02, 03, 04, 05, and 06.
13mm Socket
Flat Blade Screwdriver
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace a wiper arm on this 2002 Suzuki XL7. We show you on the driver side, but the passenger side is the same procedure. The only tools you are going to need for this is a 13mm socket, ratchet, and a flat blade screwdriver.
Start off by prying up this cap at the end of your wiper arm. Now, remove this 13mm nut. Now pump the wiper arm in and out a couple times, then tilt it up, and pull it up and off that stud. Then disconnect your wiper blade by pushing the tab and pulling it off.
Then clip it on to your new wiper arm. Push your new wiper arm down on to the stud and line it up where you want it, and then replace that 13mm nut. We'll just fast forward as Don replaces that nut and tightens it up and replaces that cap.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to replace a broken or missing rear wiper arm cap on 09 Chevy Suburban