How to Replace Windshield Washer Pump 1995-2005 Chevy Monte Carlo
Created on: 2014-08-22
How to repair, install, fix, change or replace a broken, damaged, or failing windshield washer pump on 00, 01, 02, 03, 04, 505, 06, 07 Chevrolet, Chevy Monte Carlo.
-
step 1 :Removing the Windshield Washer Pump
- Remove the two 7mm bolts from the inner fender
- Remove the three 7mm bolts from the bottom of the bumper cover
- Pull down the splash shield
- Disconnect the washer fluid level sensor wiring harness
- Disconnect the washer pump wiring harness
- Have a drain pan ready
- Pull off the washer hose
- Allow the washer fluid to drain
- Pull the pump out of the washer bottle
- Pull out the washer pump grommet
-
step 2 :Installing the New Washer Pump
- Install the new washer pump grommet
- Connect the washer pump wiring harness
- Push in the new washer pump
- Connect the fluid level sensor wiring harness
- Put the splash shield into place
- Insert the three 7mm bolts into the bumper cover
- Insert the two 7mm bolts into the inner fender
- Refill the washer fluid
Tools needed
-
Flat Blade Screwdriver
Jack Stands
7mm Socket
Drain Pan
Ratchet
Floor Jack
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we are going to show you how to replace a washer pump on this 2003 Chevy Monte Carlo and it's the same part and similar process on this Monte Carlos from 2000 to 2005 and the items you'll need are a new washer pump from 1AAuto.com, 7 millimeter socket and ratchet, flat blade screwdriver, drip pan and jack and jack stands.
Start of by removing these two 7 millimeter bolts. Now, remove these three 7 millimeter bolts right here. Now, pull this panel to the side and down and your washer bottle and washer pump are right here. Reach up and disconnect the harness for both the level sensor and the washer pump and then just pull the washer hose free and let it drain out into a drip pan. When you let it drain out, then you need to pull your pump out and it pulls out at the top and then up and out of the washer bottle and more fluid will drain out. Make sure you take out the old grommet that's in the washer bottle and insert your new grommet into the washer bottle and then reverse the process.
You can reconnect your pump first and then put it down into the washer bottle grommet first and then clip it in at the top, and then reconnect your other connections. We'll just fast forward as Mike replaces those five 7 millimeter bolts. Once those are replaced and tightened up you are all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Windshield Washer Pump 1999-2004 Honda Odyssey
How to repair, install, fix, change or replace a broken, damaged, worn out, faulty or shorted out windshield washer pumpon 1999-2004 Honda Odyssey models.
