How to Replace Washer Pump 2005-11 Volkswagen Jetta
Created on: 2015-02-23
Check out this video and learn how to replace broken windshield washer pump on a 05-11 Volkswagen Jetta.
-
step 1 :Removing the Washer Pump
- Remove the T25 screws on the wheel well panel panel on the passenger side
- Pull the panel down and out
- Twist the clip off the washer bottle pump hose
- Pull the pump forward, up, and out
- Disconnect the wiring harness
-
step 2 :Installing the Washer Pump
- Push the washer pump hose into the washer pump
- Connect the wiring harness
- Push the washer pump into the bottle
- Push the panel into place
- Tighten the T25 screws to the wheel well panel
Tools needed
-
Flat Blade Screwdriver
T25 Torx Driver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the washer pump on this 2005 Volkswagen Jetta. The items you'll need for this is a flat blade screwdriver and a T25 Torx Driver.
Now, in the wheel well, and below the front of the car, there's a series of T25 screws that you need to remove. Jack and jack stands aren't required for this procedure, but it definitely makes the procedure a lot easier if you do use them. We'll fast-forward as Mike removes those T25 screws. Pull this panel down and out, and then you reach up underneath the washer bottle. Just twist this clip and pull that hose free, and you'll feel it unlock.
Then you want to just pull the washer pump out. Pull it forward and lift it up and out. Then, you want to angle it in a way that you can get a flat blade screwdriver into that slot on the harness and disconnect it.
Then take your new washer pump, reconnect the hose, and lock the hose back in place. Then reconnect your harness, and then lower the washer pump back into the washer bottle.
Then take that panel, line it up, and feed it back into place. Then replace and tighten up those T25 screws.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
How to Replace Windshield Washer Pump 1999-2004 Honda Odyssey
How to repair, install, fix, change or replace a broken, damaged, worn out, faulty or shorted out windshield washer pumpon 1999-2004 Honda Odyssey models.
