Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Vapor Canister Vent Valve 02-10 Ford Explorer

Share on:
  1. step : Removing the Vapor Canister Vent Valve (0:49)
    • Disconnect the wiring harness
    • Pry the valve out of the frame
    • Twist the valve free
    • Twist the hose free from the valve with a pair of pliers or a flat blade screwdriver
  2. step : Installing the Vapor Canister Vent Valve (3:25)
    • Connect the hoses to the valve
    • Press the valve into the frame
    • Connect the wiring harness

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video we're going to show you how to replace the vapor canister vent valve in this 2006 Ford Explorer. We hope you like this video. If you do, please click subscribe, check out all our other videos for Ford Explorers, as well as other Fords and other makes and models. To buy the part in this video, check out 1aauto.com.

Here are the items you'll need for this repair: hammer, flat blade screwdriver

The vapor canister vent valve is near the rear of the tank, so raise and support your vehicle. Come in under the passenger's rear wheel so you can see it right here on the frame right in front of the axle and right behind your fuel tank. The first thing we'll do is disconnect the lead. There is just a tab that's toward the front of the vehicle. Press the tab to pull the lead down. And the valve is held to the frame. There's just a couple tabs. I'm actually just going to break them. And the valve is still connected to two hoses. We want to try and twist those and break them free, so let me just kind of reach up in there and twist, and I'm going to pull it toward the front of the car first and get it out of the back hose.

I'm just going to go grabbing hold of that front hose and I’m going to twist it. I'm going to take a pair of pliers, and I've actually turned it upside down, so this is actually the top of it. I just want to make sure that these hoses are kind of twisting freely or broken loose. It appears that that one is on the inside as well. Use a large screwdriver to help push the hoses off.

So this is actually the top of the valve. Again, it's upside down. I've gotten that hose off of the block that's in the back, so now I can kind of pull down on the valve and pry up on the other hose and push it off. And the valve comes down, and we'll have to take off this piece of hose which without, it's pretty easy to just grab onto it and pull it off.

Here’s the original part from our vehicle and our new part from 1A Auto. You first look at it, you may think, "Oh no, it's not right." But this actually is made to be at an angle you need it to. It's exactly the same as the original. It's going to mount, same connectors, same mounting bracket, and all the same hose connections, and it'll be an excellent replacement for your original.

I'm just going to put this small piece of hose back on to this canister block. All right, then we'll feed the valve up in and I'll get the top one first. Push that on, hold the back and push it in, and then up into place and guide this hose on. You can also reach between the crossmember and the tank. Just hold the hose back there and just keep working it out back into the hose.

Just take your mounting bracket, swivel it in position, line up the two mounting pins and push it in, and lead connect your lead. Hold the top of it down. And then just pull the white bracket up and snap it down into place.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    General Tools

  • Hammer

  • Screwdrivers & Related

  • Flat Blade Screwdriver

2004 - 2005  Mercury  Sable
2004 - 2007  Ford  Taurus
2003 - 2005  Lincoln  Aviator
2002 - 2010  Mercury  Mountaineer
2005 - 2008  Ford  E250 Van
2005 - 2008  Ford  E150 Van
2007 - 2010  Ford  Explorer Sport Trac
2002 - 2010  Ford  Explorer
2005 - 2008  Ford  E450 Van
2005 - 2005  Ford  E350 Van
2005 - 2008  Ford  E350 Van Super Duty

Vapor Canister Vent Valve

Ford Lincoln Mercury Vapor Canister Vent Valve Dorman 911-105

This part replaces:

  • Dorman 911-105
  • OE # 6L2Z9F945AA
Beginner Car Care: Tire Pressure How to Check Inflate and Deflate Tires

Beginner Car Care: Tire Pressure How to Check Inflate and Deflate Tires

Watch this video to learn how to properly maintain your tires. He experts at 1A Auto show you how to check your tire pressure, and fill it to the proper level.

Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...