Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Tweeter Speaker 94-02 Dodge Ram 1500

Share on:

Hey friends, it's Len here at 1A Auto. Today we're going to be working on our 1996 Dodge Ram 1500 and I want to show you something very basic for moving your Tweeter speaker. It should be fairly easy. I can do it and you can do it too. As always, if you need any parts, you can check us out at 1AAuto.com. Thanks.

Okay, so we've got a couple Phillips head screws, one here and one here. We'll take those out. We've got our two screws. They're both the same. This right here can move around now. That's nice. Cool. Alright, we got another screw up here. ONe there, it looks the same as the other two. Nothing special. Set all three of those aside.

Now this door panel, you're just going to feel around, make sure that there's no more screws. Sometimes you'll feel a couple coming along the bottom there, this does not feel like it has any, so we're doing all right. We have a couple of plastic trim tools. The reason why we're using plastic is because we're going to be going up against the the paint and if you're worried about your paint, then of course you don't want to scratch it up with metal.

Let's come right in here like this. Just going to go right along. Okay, rip this up. As you go, you're going to just kind of jam it towards the forward position or I guess towards the front of the vehicle. There we are and that's just because on the back side of this you've got all these little clips and they go inside these hooky dos and these things, I don't know why Dodge did it, but they've got some so you need to slide straight up and down, you've got some that you need to slide forward and back. Whatever, I'm sure they had their reasons, but anyway, we've got this almost off now.

So now what we're going to do is we're going to get the wiring off of the back here. So the next thing we're going to want to do is disconnect this right here. There's a little tab and you can usually grab it with your thumb, if you can't, small pocket screwdriver. Just grab it, pull it away, give this top area a little wiggle. Should want to slide right out. Awesome.

So right here there's little tab, you can use your thumb if you want, try to push it, just be careful for a pinch. I'm going to use this. I'm just going to push right here, that lets this come up. Now if we come to this side, I can lift right up on this. Awesome. I'm just going to go right like this, let's see if I can get it to go down and through. This is great. Now we can get our door panel right out of the way and keep on plugging away.

Okay, friends, we've got the door panel off. We can see our Tweeter speaker here. Let's take out our Phillips head screws, there's two of them that you can see. You can use a screwdriver if you want or if you have a bit driver that works just as well. I'm just going to grab this, give it a nice little tug. It's got a magnet on it, so it's going to try to stick all around here. Alright. This goes up into there and then around to here.

So I'm just going to grab this little tab. Let's see which way is it going to want to pull out. There we go, pull that down. I'm just going to grab a little forky tool here. I'll show you how to pop that out of there. We've got our little forky tool. This is great because you can go right along where the clip is and then in between the door panel and pop it right out. It went just like this.

Okay, friends, here we go. We've got our Tweeter speaker. We're just going to come through here and then bring it around to right here. So I'm just going to stick my fingers through. Woo woo, grab that. Pull it through. Awesome. Bring this up here. You've got a little tab that goes there. Two holes. Bonk. There we go. Grab my mountings screws. There's one, here's number two. Cool. I'm just going to snug this up. This one. Make sure that they're nice and tight. Last thing we want is these things loosening up driving down the road. This right here, it's going to go in this hole. This one, and this. Booya.

Alright, so it's going to be time to get the door panel on here. Before we go ahead and do that, we're going to take out all these pushpins. Alright, and we're going to put them right into the door panel and then we'll put the door panel in and the pushpins will hold it to the door. To do that, you're going to use something as simple as this. It's a little [inaudible 00:06:38] tool. Just like that. Give a little twist, whatever you got to do to get these puppies to pull out. They make them nice and long for you.

This is what they look like, they got like a little ear there and that's where it's going to slide over the door panel and then these little ears right here are what hold into this hole. We'll take all these out and we can continue. So these little tabs, the pushpins, look at that area right there that I showed you before. It just slides right in, okay? Bonk, there we are. Do the same for all of them and then we can continue.

Okay friends, let's get this door panel on. I'm going to take the electrical connector or the electrical harness here, try to bring it up and through this. Can be a little tricky sometimes, try to get out of the way. Just give it a, you know ... There it is. Just have to be a little forceful with it sometimes, that's okay.

We've got our electrical connector right here for our mirror switch. We're going to plug that in. You can tell which way it goes because it has this little nub right here and that lines up with the nub in there. Slide it in, give it a tug. Don't pull the whole thing right off the door though. Put that back on there. Cool. Alright, let's bring this up. What we're going to pay attention to now is the door handle. Just going to try to pull the door handle through its whole. Slide this over. Awesome.

We've got our lock. Just take the lock, just bring it right through the hole. Awesome. Bring the door panel down, get it so all of our little pushpins are going to be lined up with our holes. Once you get a couple of them started in, generally speaking, all the rest will be lined up. The hardest ones for me to see are the top ones, but it is important to get them lined up. Awesome.

Down along the other side here. Same thing along this side, just line up as many of them as you can before you start bonking them in. One in the center here that is lined up but not going in. There it is. Aw yeah. Awesome. You just want to make sure that your door lock and flow up and down easily. If it can't, this could be wedged a little bit. Maybe the bar got bent in some of the process that you were doing. If that's the case, well you're just going to have to pop this back out of the way and see what you can do about bending it because you want this to make sure that it can go up and down. That looks really great.

I would say we can continue, so now we're going to take our long screw and we're going to go right up in here. Try To find the hole real quick and then we'll get out of the way. There it is. Okay, we don't need it to be too tight. We don't want to break the plastic or anything, we just need it to pull this right up against. That looks pretty great. We can move along.

Grab our switch here. It's just going to slide in. Let's take a look at. It goes in the backside first and then the front side. Bonk bonk, very nice. We're going to grab our little cup with our two mounting screws. Put it facing the right way. You've got your holes, you can see where it goes right down into the door. Phillips head. Start that one in, start this one in. Okay. We're just going to bring it all the way down. That's snug. Awesome.

Thanks for watching. Visit A1Auto.com, your place for DIY auto repairs for great parts, great service, and more content.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver
  • Pocket Screwdriver

  • Specialty Tools

  • Plastic Fastener Remover
  • Trim Tool Set


Check Engine Light? Why the Gas Cap is a Common Cause!

Check Engine Light? Why the Gas Cap is a Common Cause!

Check engine light came on right after a fill up? Check out this 1A Auto video too see some of the causes of this common trouble code.

Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...