1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Turn Signal Corner Lights 00-04 Nissan Pathfinder

Share on:

How to Replace Turn Signal Corner Lights 00-04 Nissan Pathfinder

Created on: 2018-06-29

How to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped turn signal lights on 00, 01, 02, 03, 04 Nissan Pathfinder

  1. step 1 :Opening the Hood
    • Pull the hood release lever
    • Locate the safety latch
    • Release the safety latch
    • Insert the prop rod
  2. step 2 :Changing the Turn Signal Assembly
    • Remove the 10mm bolt
    • Pull and pry straight forward to remove the assembly
    • Disconnect the electrical connection
    • Remove the bulb socket
    • Insert the socket and bulb into the new assembly
    • Lock the connector in place
    • Reconnect the electrical connector
    • Line up the tabs and push in
    • Snug up the 10mm bolt
    • Close the hood

Tools needed for replacement

  • Ratchets & Related

    Socket Extensions


  • Sockets - Metric

    10mm Socket

Installation Video
Watch video

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years.

I'm going to pop the hood. Grab the handle right there. Pull it back. To release the safety, come over here, and then you're gonna pull up on the latch. That will come up. Then, pull up on the prop rod. Stick it right there.

All right, we're gonna take this 10 millimeter bolt out right here. We use a 10 millimeter socket and extension and a ratchet. Pull that out.

At this point, this light will come off, come straight forward. It looks like this piece has broken on this vehicle, but normally you'd have to pry a little bit harder to get this off.

We're gonna remove this disconnect connector right here. Just push down and pull.

Here's our old front turn-signal marker assembly, and here's our new turn-signal marker assembly from As you can see, the colors are the same, the shape is the same. Flip to the back-side. The configuration of the mounting position is the same. You do have to swap the bulb and the socket over in the wiring harness. Get yours from, and you'll be ready to rock and roll.

So, I'm gonna pull this connector off first. Just slide it out, maybe a little bit tricky. Just slide it up, and then take the socket out, twist it to the left, and pull.

For the new one, we're gonna take this little piece off, and we're gonna line up the bulb socket. The bigger slots on the bigger holes, twist. And then take the connector, we're just gonna slide it on, just like that.

Then we're gonna connect the electrical connector, just like that. Then we'll align this tab up with that and slip it in. Take the 10 millimeter bolt, install that, then we'll snuggle this down, not too tight 'cause it is in plastic.

Put the prop rod down right there. Close the hood.

Thanks for watching. Visit us at for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

2000 - 2004  Nissan  Pathfinder
1999 - 1999  Nissan  Pathfinder
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.