1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

Year
Make
Model
Options
Drivetrain

How to Replace Turn Signal Bulb 2011-16 Toyota Tundra

Created on: 2018-10-04

How to replace a broken, damaged or burnt out turn signal light bulb to the 03 Toyota Tundra.

  1. step 1 :Removing the Turn Signal
    • Remove the Phillips head screw from the turn signal housing
    • Pull the turn signal housing forward
    • Press the tab and disconnect the electrical connector
  2. step 2 :Servicing the Bulb
    • Twist the socket counterclockwise
    • Pull the 3157A Amber bulb off the socket
    • Press the new bulb onto the socket
    • Turn the socket clockwise
  3. step 3 :Installing the Turn Signal
    • Connect the electrical connector
    • Turn the socket clockwise
    • Press the housing into place
    • Tighten the Phillips screw to the housing

Tools needed

  • Gloves

    Phillips Head Screwdriver

Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.

Hey, everyone. Sue here at 1A Auto and today we're going to show you how to change the bulb on a '03 Tundra, marker bulb and turn signal. If you need any parts for your car click on the link below and head on over to 1aauto.com.

Remove this screw. It's a Phillips head. Set it aside and then you're going to grab this lamp. Now, I like to use a body tool, but I don't have to on this one. So, just pull it towards you. And, there's the marker light. Push down on the tab and release the electrical connector.

Now, there's the socket. You're going to twist it counterclockwise and pull it out. That bulb should be a 3157A. That's for amber, an amber bulb. Replace it back in the socket. Line up the four marks. They're sized so you'll find it as it goes around clockwise. Lock it in. Reconnect the tab. Then I'm just going to guide it straight in.

Put these two tabs right there on that. Come on, there you go, there you go. There's this little key tab over here. Replace the Phillips screw. Just snug it down. It's plastic here. Ready to go.

Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Scraping Noise Under Car Dragging Splash Shield Try This DIY Quick Fix

Learn how to repair a torn, dragging splash shield, and why it's a good idea to do!

Share on:
Copy URL
Go To Top
Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.