How To Replace Throttle Position Sensor 2002-06 Jeep Liberty
Created on: 2014-01-14
Check out this video on how to replace the throttle position sensor on your 02-06 Jeep Liberty.
-
step 1 :Remove the old throttle position sensor
- Disconnect the wiring harness.
- Remove the two T20 Torx bolts.
-
step 2 :Install the new throttle position sensor from 1A Auto
- Insert the throttle position sensor
- Secure the sensor with your T20 Torx driver
- Connect the wiring harness.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet. Hi. I'm Don from 1A Auto. I hope this how-to video helps you out and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks. In this video, we're going to show you how to replace the throttle position sensor on this 2006 Jeep Liberty with the 3.7 liter V-6 engine. The only tool you'll need is a T20 Torx bit and a ratchet.
Your throttle position sensor is located right here. You want to start off by pulling out this red clip on the harness, pushing the tab and pulling the harness free. On your throttle position sensor, there are two T20 Torx bolts. There's one there and one right there. Just go ahead and remove those. We'll fast-forward as Don does this. Once those are removed, the throttle position sensor will pull right off. Then take your new one, push it into place and replace those two T20 Torx bolts. Again, we'll fast-forward as Don just tightens those up. Reconnect your harness. Push in the red clip and you're all set.
We hope this video helps you out brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free 888-844-3393. We're a company that's here for you on the internet and in person.
How To Replace Throttle Position Sensor 1998-2006 Suzuki XL-7
If the throttle position sensor needs to be replaced, find out how to do this easy repair yourself with this how-to video
