How to Replace Third Brake Light Bulb 2008-12 Ford Escape

1. step 1 :Removing the Third Brake Light 0:30

   • Remove the Phillips screws from the housing
   • Open the lift glass
   • Pry up the third brake light housing with a trim tool
   • Pry the third brake light out
   • Disconnect the hose with a trim tool or flat blade screwdriver
   • Disconnect the wiring harness

2. step 2 :Servicing the Driver Side Tail Light Bulb 1:35

   • Remove the back bulb container from the assembly with a pick
   • Pull the bulb straight off of the socket
   • With gloves on, press the new 194 bulb to the socket
   • Press the bulb container to the brake light

3. step 3 :Installing the Third Brake Light 3:09

   • Connect the wiring harness to the third brake light housing
   • Connect the washer hose to the third brake light housing
   • Insert the third brake light into place
   • Close the lift glass
   • Tighten the Phillips screws to the third brake light

Tools needed

• Phillips Head Screwdriver

  Trim Tool Set

  Pick