How to Replace Temperature Blend Door Actuator 1996-99 Cadillac Deville
Created on: 2011-08-02
In this video, 1A Auto shows you how to replace a broken or not working air conditioning/heater air temperature control in a 96-99 Cadillac Deville.
-
step 1 :Removing the Temp. Door Actuator
- Undo the access panel clips
- Remove the access panel
- Use needle nose pliers to squeeze the actuator rod and push it out
- Remove the two 7/32 inch bolts from the actuator
- Unplug the actuator
- Remove the actuator
-
step 2 :Installing the New Temp. Door Actuator
- Reconnect the electrical connector to the actuator
- Put the actuator into place
- Start the bolts by hand
- Tighten the bolts with the socket and ratchet
- Reconnect the actuator rod
- Put the access panel back into place
- Re-insert the access panel clips
Tools needed
-
Socket Extensions
Flat Blade Screwdriver
Ratchet
Needle nose pliers
7/32 Inch Socket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the temp. door actuator. This is a problem if your vehicle's AC temperature doesn't change. It always blows hot or always blows cold. That's usually this door, this actuator.
Tools you'll need are a flat blade screwdriver, a 7/32 inch socket with a ratchet and an extension, and a pair of needle nose pliers.
In here, underneath, there are some clips that hold this panel on the bottom and there are those clips. You want to use a screwdriver, pry the center down, and then the clips pull out. Okay, then once you have those clips off, just pull this down and out ... and right here is your actuator. Use a pair of needle nose pliers and squeeze that tab. Push it up through. Next, remove these two bolts. They're 7/32 inch. We'll speed up as we just remove those two bolts. The actuator comes down, and you can see that it's plugged in right here. Pull this tab up and it comes off. Here's the new actuator from 1A Auto, same as the original one. We'll connect our harness connection first, and then put it up and in. Let's see.
We'll speed it up here as I start those bolts and then tighten them up. You want to tighten them up nice and snug. Don't want to over tighten them though. I do apologize for the camera angles. I am actually holding the camera with one hand and installing it with the other.
Now you need to reconnect the rod that connects to the temp door, and I'd separated the small clip from the rod. Clip the clip in first, and then just put the rod on, just kind of relax it on there and then press it down into the clip.
Now, we'll fast forward. The last step is just to put that access panel back up in there and put the three clips back in and you should be all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How To Locate Temperature Door Actuator 2006-12 Chevy Impala
How to locate and identify the air blend door on Chevy Impala, model years 06, 07, 08, 09, 10, 11, and 12.
